IOT BASED UNDERGROUND CABLE FAULT DETECTION SYSTEM
Here we are making the smart underground cable fault protection system which will be IoT based it will alert when the fault occur in underground cable. We are making prototype module which installed in base station . In this project we require raspberry pi boards, GSM plus GPS Shields for raspberry
Project Title
IOT BASED UNDERGROUND CABLE FAULT DETECTION SYSTEM
Project Area of Specialization
Project Summary
Here we are making the smart underground cable fault protection system which will be IoT based it will alert when the fault occur in underground cable. We are making prototype module which installed in base station . In this project we require raspberry pi boards, GSM plus GPS Shields for raspberry pi and power supplies connections and some other electronic models for raspberry pi for assembling this project.
Project Objectives
The aim of this project is to determine the distance of underground cable fault from base station in kilometers and also find the location of that faulty place . And also the safety of desire system .
Project Implementation Method
We will be making the prototype for underground cable fault on initial basis .The system will be installed in base station. The input and output ports of Microprocessor, LCD display, RTC and Wi-Fi module of the system are configured and initialized. When fault occurs (switch is pressed), the fault distance, time and phase are displayed corresponding to that fault. The above fault information will be displayed in the webpage using Wi-Fi module.
Benefits of the Project
It saves precious time in tracing the faulty part and usless rodents . By this you can get exact location and fix it quickly. This will also increase the safety parameters you get notified when fault occur. Either someone face it accidently, which may harm anyone life.
Technical Details of Final Deliverable
We will be using rapberry pi development board in in this prototype with GSM & GPS shields and some wiring connections of board with LCD for raspberry pi to display the message. Relay is use for current sensing and other accessories like power supplies connections and frames etc.
The whole circuit will be running on 12v DC and will be drawing current less then 1 amps
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Raspberry PI Board | Equipment | 1 | 10000 | 10000 |
| GSM | Equipment | 1 | 4500 | 4500 |
| GPS | Equipment | 1 | 2000 | 2000 |
| lipo Battery | Equipment | 1 | 4000 | 4000 |
| imax b6 lipo battery charger | Equipment | 1 | 3500 | 3500 |
| RASPBERRY PI 16 GB MICRO SD CARD | Equipment | 1 | 500 | 500 |
| BUCK CONVERTER | Equipment | 1 | 500 | 500 |
| 4 CHANNEL RELAYS | Equipment | 1 | 450 | 450 |
| 5 INCH LCD | Equipment | 1 | 5000 | 5000 |
| OTHER ACCESSORIES | Miscellaneous | 1 | 10000 | 10000 |
| Total in (Rs) | 40450 |
If you need this project, please contact me on contact@adikhanofficial.com
Salons booking app
Beauty Salon Booking Application will provide an online platform to salon and client, whic...
Job seeker website
The Job seeker project is a web based application developed in php and html&css langua...
NUML Student Facilitation and Chatbot
NUML Student Facilitation and Chatbot is an online web based management system, This ...
ISHTEHAAR.pk
We?re making a project, titled ?Ishtehaar. pk?, it?s a web-based project which uses a web...
GPS Spoofing , To verify if jamming can help in successful spoofing
GPS Spoofing is an act of creating a fake GPS signal to fool a device into thinking that i...