Adil Khan 1 year ago
AdiKhanOfficial #FYP Ideas

wireless communication in smart grid

kepping in view the increasing demand and shortage of energy, we are designing a system that is being adopted by developed countries, termed as "Smart Grid System". we are designing a system that compromises of hybrid system( renewable + wapda) and it will sense load continuously. it wil use the che

Project Title

wireless communication in smart grid

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

kepping in view the increasing demand and shortage of energy, we are designing a system that is being adopted by developed countries, termed as "Smart Grid System". we are designing a system that compromises of hybrid system( renewable + wapda) and it will sense load continuously. it wil use the cheapest energy source available. if demand increases capacity of renewable energy source, wapda and renewable sources will merge and divide the load among them. this will reduce the utility charges to consumers upto 50% and invokes public towards renewable energy. this system will also be able to senese energy theft along transmission line which will greatly enhance transmission and help country to cover losses due to electrical theft and also use technique of net metering.

Project Objectives

  1. adopting modern techniques of power transmission & distribution.
  2. a battery less system that will reduce installation cost
  3. it will minimze the cost of energy to customers upto 50%
  4. decreases energy theft in transmission line
  5. emphasizes public to adopt renewable energy
  6. help overcoming energy shortage in region
  7. increase in renewable source= eco- friendly

Project Implementation Method

load will be fed with solar panel located at consumer end & with WAPDA (converted to DC). one master controller and a switching circuit will attached between solar panel & wapda and slave controller at consumer end. discussing the following scenarios

  • if load demand is in the capacity of solar panel (i.e if load demand is 3A and solar can supply 3A) information will be sent from slave to master controller to cut off wapda and all load will be fed through solar panels. 
  • if load demand is less than capactiy of solar panel (i.e demand is 2A and solar is capable of supplying 3A, it will supply the load as well as shift towards selling remaining 1A to wapda). 
  • if load demand increases capacity of solar panel (i.e load demand is 5A and solar panel's capacity is 3A) slave controller will send this info to master controller which will merge these two sources via switching circuit. this will divide the load between two sources (i.e 2.5A solar +2.5 wapda= 5A load). this will reduce the cost to consumer.

morever, this project is also focussed on eleminiting power theft along power transmission. this will be accomplised by using current sensor at supplying and consumer end. reading of both sensors will be compared with certain percentage of margin. if difference of values increases this margin, it will indicate power theft along that transmission line.

Benefits of the Project

  1. adopting modern techniques of power transmission & distribution.
  2. a battery less system that will reduce installation cost
  3. it will minimze the cost of energy to customers upto 50%
  4. decreases energy theft in transmission line
  5. emphasizes public to adopt renewable energy
  6. help overcoming energy shortage in region
  7. increase in renewable source= eco- friendly

Technical Details of Final Deliverable

final deliverables will be a hardware based model comprising of buck converter (for maintaing fix dc voltage), a protection circuit to avoid reverse power flow, a master controller and a slave controller which perform actions of selecting energy sources smartly via switching circuits and power theft detection.

Final Deliverable of the Project

Hardware System

Core Industry

Energy

Other Industries

Others

Core Technology

Clean Tech

Other Technologies

Others

Sustainable Development Goals

Affordable and Clean Energy, Industry, Innovation and Infrastructure

Required Resources

Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
sensors and controllers Equipment180008000
buck converter Equipment11200012000
rectifiers Equipment150005000
others Equipment11500015000
solar module Equipment11500015000
Total in (Rs) 55000
If you need this project, please contact me on contact@adikhanofficial.com
0
128
Self Driving System Using Machine Learning

 We propose a self-driving mechanism that will make use of latest trends in machine l...

1675638330.png
Adil Khan
1 year ago
Web Based Iris Recognition System

In the entire globe any educational organization is concerned in relation to the attendanc...

1675638330.png
Adil Khan
1 year ago
Design And Fabrication Of Shoe Testing Machine

Our project is about a shoe testing machine that would test the life of a shoe by replicat...

1675638330.png
Adil Khan
1 year ago
Sample Thesis (NOMA 5g)

1675638330.png
Adil Khan
7 years ago
air pollution detector

Various researches and variations has done before different pollution detection tools are...

1675638330.png
Adil Khan
1 year ago