Design of efficient and less power consume HVAC system based on induced and forced draft cooling tower with variant fillings for hospitals
The Aim of this abstract is designing and testing an Induced Draft CoolingTower(IDCT). The Cooling tower is the main instrument which used to cool the hot water from the condenser and release heat into the atmosphere at a power plant. Temperature is maintaining as cool as original condition. One of
2025-06-28 16:26:35 - Adil Khan
Design of efficient and less power consume HVAC system based on induced and forced draft cooling tower with variant fillings for hospitals
Project Area of Specialization Mechanical EngineeringProject SummaryThe Aim of this abstract is designing and testing an Induced Draft CoolingTower(IDCT). The Cooling tower is the main instrument which used to cool the hot water from the condenser and release heat into the atmosphere at a power plant. Temperature is maintaining as cool as original condition. One of the components of the cooling tower is filler. IDCT was filled with PVC wave filler. The results indicate that the tower characteristics increase with increase cold air velocity, with the variation of filler, the highest tower charactertic get aim wave filler arrangement.Industrial units have always been involved in manufacturing, processing or assembling of products. Cooling towers are one of the significant components along with many other heavy types of machinery in an industrial unit. After the development of the condensers in the nineteenth century the cooling towers originated and improvements were made with the passage of time. These dynamic towers are widely used to discard the excess heat from the water during the industrial operations into the atmosphere. During this the water and the air come in contact in order to lower the temperature of the water circulating in various systems. They either use evaporation or cooling of the fluid (water)to do so. Cooling towers are widely used in oil refineries, petrochemical plants, thermal
power plants, nuclear plants, food processing plants, natural gas plants etc.
The objectives of this paper are to:
The Aim of this abstract is designing and testing an Induced DraftCoolingTower(IDCT).
Design of efficient and less power consumed HVACs system based on induced and force
draft cooling tower with variant fillings for hospital.
The aim of this cooling tower is to designing and testing an induced draft cooling tower
This cooling tower design is best for lab/practical/ study of cooling tower working
principle.
Industrial units have always been involved in manufacturing, processing or assembling of
products. Cooling towers are one of the significant components along with many other
heavy types of machinery in an industrial unit. After the development of the condensers
in the nineteenth century the cooling towers originated and improvements were made
with the passage of time. These dynamic towers are widely used to discard the excess heat
from the water during the industrial operations into the atmosphere. During this the
water and the air come in contact in order to lower the temperature of the water
circulating in various systems. They either use evaporation or cooling of the fluid (water)
to do so. Cooling towers are widely used in oil refineries, petrochemical plants, thermal
power plants, nuclear plants, food processing plants, natural gas plants etc.
Choose the Right Size
When choosing a HVAC or industrial cooling tower, the appropriate size must
be selected to maximize its benefits. Cooling towers are a considerably affordable and effective
way of reducing heat from various industrial processes, so size must be considered. Cooling
towers come in many sizes and are used for nuclear and thermal power plants, petrochemical
plants, and food processing plants, petroleum refineries, and HVAC systems.
Assess Efficiency Ensuring cooling tower efficiency is essential when choosing one. In many
towers, especially the wet metal-clad types, cooling efficiency is affected when aggressive chemical
solutions are limited due to the risk of harm and damage to metal surfaces.
Consider Noise
As mentioned, the noise a cooling tower emits is essential to consider. Many older cooling towers are so loud that they sound like an airplane is passing overhead. As you can effective for productivity, especially in an office building.
COMPONENTS Of Cooling Tower
- Casing and Frame:-
- Fans
- Fill
- Water sprinkle
- Water pump
- Flow meter
- Heater
- Controlling and monitoring panel 2 way switch, power indicator, thermostat
Energy Efficient
save more energy as compare to market available cooling tower. We have use single phase motor and fan use in it but market available cooling tower big in size and has 3 phase fan in it and lager in size in this reason not easily moveable and take consumed lot of electricity.
Design of cooling tower
Design of cooling tower is different for the conventional and market available cooling tower we designed this cooling tower ourselves we designed this cooling tower to keeping in mind that it will help of student to learn about cooling tower. This design show the inner process and function of cooling tower. Easy monitoring Efficiency We step far word and rise a step to make cooling tower advanced we installed Easy Efficiency monitoring system and we want to make cooling tower iot monitoring base because cooling tower would be installed on the roof or height.
Easy Cleaning.
This cooling tower is easy to clean and draining water is easy to change filling.
Low Price
All things considered, cooling tower is more affordable than conventional cooing
tower. Its cost is low than the other cooling tower.
Installation
This project is assembling base project easy installed and easy to move.
Bonus Features
We used thermostat it is module use to auto temperature controlling or switching. We connect heater by thermostat for the controlling of hot basin water temperature. This cooling tower use in molding machine or chillers as the place of conventional cooling tower
Design of cooling tower
Design of cooling tower is different for the conventional and market available cooling tower we designed this cooling tower ourselves we designed this cooling tower to keeping in mind that it will help of student to learn about cooling tower. This design show the inner process and function of cooling tower. Easy monitoring Efficiency We step far word and rise a step to make cooling tower advanced we installed Easy Efficiency monitoring system and we want to make cooling tower iot monitoring base because cooling tower would be installed on the roof or height.
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 67400 | |||
| Fan | Equipment | 1 | 5000 | 5000 |
| water pump | Equipment | 1 | 4000 | 4000 |
| Pvc Filling | Equipment | 1 | 13000 | 13000 |
| water sprinkel | Equipment | 1 | 1000 | 1000 |
| heater | Equipment | 2 | 700 | 1400 |
| Flow meter | Equipment | 1 | 4000 | 4000 |
| Frame | Equipment | 1 | 8000 | 8000 |
| labor | Equipment | 1 | 4000 | 4000 |
| color | Equipment | 1 | 5000 | 5000 |
| plumbing and wire | Equipment | 1 | 6000 | 6000 |
| galvanized casing | Equipment | 1 | 16000 | 16000 |