Design and Fabrication of Electric Supercharger
This project is concerned with performance enhancement of small capacity petrol engine. These small capacity petrol engines are used in numerous daily life machines like loaders, lawnmovers, chain saw and electricity generator etc. The performance of engine can be improved by engine parameters
Project Title
Design and Fabrication of Electric Supercharger
Project Area of Specialization
Project Summary
This project is concerned with performance enhancement of small capacity petrol engine. These small capacity petrol engines are used in numerous daily life machines like loaders, lawnmovers, chain saw and electricity generator etc. The performance of engine can be improved by engine parameters like Fuel Consumption, Torque, Breakhorse Power (BHP). Fuel consumption can be improved by complete combustion while Torque and BHP can be enhanced by increasing the amount of air fuel mixture into the combustion chamber of the engine. The discussed improvement is generally achieved by implementing Turbocharger or Supercharger. Turbochargers have Turbo lag and the operate at high RPM while Superchargers have their mechanical losses. Therefore electric supercharger is selected for this project. The electric supercharger will imrove combustion and increasing the Torque and BHP with a very little increase in weight.
Project Objectives
1-To enhance Throttle Response
2-To overcome Turbo Lag.
3-To enhance Break Horse Power of Engine
4-To enhance the Torque
Project Implementation Method
Methodology
1- Introduction
2-Litrature Review
3- Engine Selection
4-Design and fabrication of electric super charger
5- Implementation of electric super charger
6- Experimental Analysis
7- Conclusion
Benefits of the Project
The load carrying capacity of machines can be increased by increasing power of small size engines without incresing their weight. It decreses the overall cost of machine.
Technical Details of Final Deliverable
It will cocsist of a small capacity engine with an electric supercharger mounted on it.
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Electric super charger | Equipment | 1 | 20000 | 20000 |
| Electrical controller setup | Equipment | 1 | 25000 | 25000 |
| battery 6 amp, 12 volt | Equipment | 1 | 2500 | 2500 |
| transportation fees | Miscellaneous | 10 | 700 | 7000 |
| battery 6 amp, 12 volt | Equipment | 1 | 2500 | 2500 |
| transportation | Miscellaneous | 0 | 0 | 0 |
| Total in (Rs) | 57000 |
If you need this project, please contact me on contact@adikhanofficial.com
System on Chip with software plugin for IoT
PROJECT SUMMARY Our project aims to add some selected group of peripherals and which are T...
Design and Feasibility Study of the Solar Powered Carport for Universi...
Pakistan has been striving through old energy crisis over the last decade. Being the engin...
Bicycle Generator
The purpose of this project is to design a power generation system that will utilize the m...
Hand Written Digit Recognizer
SUMMARY OF HAND WRITTEN DIGIT RECOGNIZER: Firstly ,we are going to import all the mo...
FYP Portal
As a graduate student, every student has to make the final year project to get graduated f...