Solar PV based wireless charger

Project Title

Solar PV based wireless charger

Project Area of Specialization Wearables and ImplantableProject Summary

Although many charging systems with high efficiency are available in the market and these charging systems might be wireless or not but these available charging systems are more power consuming and expensive. Also these devices might be environmentally harmful or these ones may cause health hazards. The basic purpose of this project is to design an economical, environment friendly and efficient wireless charger for the electronic devices. Focusing on overcoming the above-mentioned difficulties this project is carried out in order to design and fabricate a Solar PV Energy powered source equipped with wireless charging pad system. In which there is no need of any kind of physical connecting wire to connect the power supply to the receiving end where the device is placed to charge. This electronic charger can charge mobile phones, Laptops or any of the smart devices like smart watches etc wirelessly when they are placed over the charging pad. Wireless charger limits the use of wires for a common charging purpose, no one have to stuck around the phone and hung to a cable just to charge the device whether the mobile phone is just placed over the charging pad. Our charging pad utilizes non-conventional source of energy (solar cell) to provide power to charge the device. Wireless charger increases life span of mobile in compare to ordinary charger.

Project Objectives

1. To make a charger that is cost effective.
2. To enhance the efficiency of wireless power transfer.
3. To achieve satisfactory charging in less time.
4. To design an environment friendly and safe to use device.

Project Implementation Method

A reciever and a transmitter section is constructed fro the cell phones and a seperate reciever and a transmitter is constructed for the laptops etc. The whole setup is empowered with solar plates and batteries.

Benefits of the Project

Enviromentally friendly.

Cheaper than other chargers.

Portable device.

Technical Details of Final Deliverable

Receiver and Transmitter for cell phones.

Reciever and transmitter for laptops.

Solar Plates .

Batteries.

Charge controllers.

Final Deliverable of the Project Hardware SystemType of Industry Others Technologies Wearables and ImplantablesSustainable Development Goals Affordable and Clean EnergyRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	64200
Solar Plates	Equipment	2	10000	20000
Charge controllers	Equipment	2	2000	4000
Batteries	Equipment	3	4000	12000
Vero Boards	Equipment	10	200	2000
Mosfets	Equipment	16	200	3200
Rectifiers	Equipment	10	50	500
Capacitors	Equipment	25	50	1250
Resistance	Equipment	10	5	50
Other Electronic Equipment	Equipment	30	100	3000
Coils	Equipment	6	500	3000
Casing	Equipment	4	2000	8000
Solder and wire	Miscellaneous	3	400	1200
Fares	Miscellaneous	1	6000	6000