Social Distancing Caps for COVID

Project Title

Social Distancing Caps for COVID

Project Area of Specialization Wearables and ImplantableProject Summary

The project idea is to design a Capswhich can detect if someone from behind doesn't follows social distancing and comes closer to you. This kind of caps can be wore in offices, malls, public transports.

Project Objectives

To design and develop a low cost cap that can be used in pandemic scenario ike COVID19

To let the people maintain social distancing

To inform a person through alarm if some one from behind comes ear

Project Implementation Method

First of all we will gather and purchase our components. Second stage is to combine these components together. After that we will program our microcontroller as per our needs. Then we will test, ansalyze the hardware and then generate results. 

Benefits of the Project

During Covid19 pandemic situation, in markets it was observed that when people were buying groceries and standing in queue. we were cautious about maintaining social distancing and m strictly maintaining 1.5 metres gap in front and sideways too. But later we found, the person behind us doesn't follow the social distancing and comes closer to us, which we are not aware.So this project helps to maintain social distancing from our backside even though we are not looking back

Technical Details of Final Deliverable

The ultrasonic sensor is placed on backside of the caps, which measure the distance between the sensor and person stood behind us. We have programmed the arduino Nano where the variable " SuggestedSocialDistance" can be modified to range 100 cms to 200cms. If the measured ultrasonic sensor distance is lesser than the "SuggestedSocialDistance", then the servo motors start rotating gently from 0 to 180 degree and falls back to 0 quickly to get your attention.

Final Deliverable of the Project Hardware SystemCore Industry HealthOther IndustriesCore Technology Wearables and ImplantablesOther TechnologiesSustainable Development Goals Good Health and Well-Being for PeopleRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	31500
Ultrasonic Distance Measuring Sensor Module HC-SR04	Equipment	2	500	1000
SG90 Micro-servo motor	Equipment	2	500	1000
Energizer 9V Battery Alkaline General Purpose Battery	Equipment	10	500	5000
Goot 30S KR Soldering iron (generic)	Equipment	1	3000	3000
Arduino Nano Every Board	Equipment	2	3000	6000
Hot glue gun (generic)	Equipment	1	1500	1500
Glue sticks	Equipment	5	500	2500
Jumper Wires	Equipment	2	150	300
Slide switch	Equipment	2	100	200
Solder Wire - 60/40 - 0.8 mm - 100 gm	Equipment	2	500	1000
Tape, Double Sided, Acrylic Adhesive, Vinyl, White	Equipment	4	250	1000
Wires	Equipment	2	500	1000
Thesis	Miscellaneous	8	1000	8000