Renewable Energy Sources With Monitoring System
Our design uses Wind, Solar and Tidal Power generation systems which has a power rating of 200 watt module is a light system built for near shore generation and is very efficient and durable. This is because all the best possible materials and protections for marine requirements are used and applied
2025-06-28 16:34:47 - Adil Khan
Renewable Energy Sources With Monitoring System
Project Area of Specialization Shared EconomyProject SummaryOur design uses Wind, Solar and Tidal Power generation systems which has a power rating of 200 watt module is a light system built for near shore generation and is very efficient and durable. This is because all the best possible materials and protections for marine requirements are used and applied. The system can be easily handled and transported on trailers to their appointed locations and then carried on barges towed by trawlers to their sea locations.
Looking at the cost effectiveness of the system we know for a fact that any alternate energy harvesting system whether it is Solar, Wind or tidal, has high initial costs and that is a burden which someone has to take. But if ventured into, the payoff time might take about three to four years and then the system earns for itself. A time comes when the cost of returns goes up ten the investments and then the investors start to reap the benefits
Here we are also apply the voltage sensor and we can monitor volt through android phone.
Project Objectives- The main object that mostly facilitate those people (rural areas, coastline areas, hilly areas, sea boats etc ) they live away from populated areas and general electrical connections from national grid and the renewable Energy source are freely available in nature..
- The multi source power generation ( Renewable Energy) is to over come the electricity problems that we are facing in domestic, industrial or any other energy sector.
- Environment friendly generation without any kind of pollution.
These steps are further divided into numerous sub steps.
- The project is first designed than will be used for generation of electrical energy.
- The three generating sources will be connected to the module. At the top the wind turbine which will convert the atmospheric wind into electrical energy
The solar panels convert the solar energy into electrical energy
- At the lower part of module, the tidal waves energy convertor converts the waves energy into electrical energy
- It means that all the three renewable energy resources work during sun light and during other remaining two systems will continue their function.
Benefits of the source :
- The main Benefits that mostly facilitate those people living in rural areas/ coastline areas, sea boats) as they live away from populated areas with no electrical connections from national grid.
- The renewable Energy source are freely available in nature.
- Environment friendly generation without any kind of pollution.
Technical Details of Final Deliverable
- Wind, Solar and tidal generators are installed in a single module.
- A observation panel is provided with voltmeter, indicator light
- It provides free energy all time.
- Wind, Solar and Tidal Power generation systems which has a power rating of 200 watt
It is easy to install and require one time investment.
Final Deliverable of the Project Hardware SystemType of Industry Energy Technologies OthersSustainable Development Goals Industry, Innovation and InfrastructureRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 65000 | |||
| Solar panel sheets | Equipment | 4 | 4000 | 16000 |
| DC to DC boost converter output | Equipment | 1 | 3000 | 3000 |
| DC low rpm motor wind & underwater alternator | Equipment | 2 | 5000 | 10000 |
| Body Frame | Equipment | 1 | 5000 | 5000 |
| Thermocol buoys floating materials for floats | Equipment | 1 | 2500 | 2500 |
| DC cable for power transfer | Equipment | 1 | 2000 | 2000 |
| Arduino, Bluetooth | Equipment | 1 | 2500 | 2500 |
| Full wave bridge rectifier three phase | Equipment | 1 | 2000 | 2000 |
| Full wave bridge rectifier three phase | Equipment | 1 | 4000 | 4000 |
| Installation Cost | Equipment | 1 | 3000 | 3000 |
| Other Equipments | Equipment | 1 | 15000 | 15000 |