Smart Monitoring For Water Dispensers

Project Title

Smart Monitoring For Water Dispensers

Project Area of Specialization Internet of ThingsProject Summary

In this project, the main concentration is to manage the water dispensers by measuring the water levels. The system monitors the water dispensers by load cell and compare the level with threshold volume of the dispenser and then informs about the level of water left in the water dispenser via a desktop application to administrator.

The main goal of this project is to monitor the water levels and manage overall dispensers. It will provide faster, easier and cost effective management.

Existing water level management systems have own advantages and drawbacks in addressing the level. In this project, we will be overcome the problems and implemented an efficient Wireless water level management system.

Project Objectives

One of the major problems faced by most of the large institutions is maintaining drinking water in water dispensers at various places inside the institution.

We are intended to implement on Four Dispensers.

Project Implementation Method

Desktop Application: 

It will be based on Real-time which uses JAVA or C# programming language.

Implementation details are:

1. .The system begins with the Load Cell connected to a Water dispenser.
2. The Load-cell checks the water level and sends signal to the Arduino micro controller.
3. Then Arduino forwards data to desktop application by using Radio Frequency (RF) module.
4. If the level is below, it generates notification on a application.

Benefits of the Project

1. In this system desktop application will be developed which is user friendly.
2. Monitoring will be easy no need to manual supervision.
3. Only authorized people can have access to the application.
4. Only a single person can manage multiple water dispensers.

Technical Details of Final Deliverable

1. Implemented water level monitoring solution.
2. User-frendly desktop application.
3. Final report.

Final Deliverable of the Project HW/SW integrated systemType of Industry IT , Telecommunication Technologies Internet of Things (IoT)Sustainable Development Goals Good Health and Well-Being for People, Clean Water and Sanitation, Decent Work and Economic Growth, Industry, Innovation and Infrastructure, Sustainable Cities and Communities, Responsible Consumption and ProductionRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	56960
Load Cell 20 KG	Equipment	8	3800	30400
Arduino Mega	Equipment	4	1000	4000
RF Module (node to node)	Equipment	5	2000	10000
Acrylic Plastic Sheet 8mm 2sq.ft	Equipment	4	1500	6000
Spring Screw	Equipment	32	80	2560
Jumper wires/Cables	Equipment	32	25	800
Poster Printing	Miscellaneous	2	250	500
Final Report Printing	Miscellaneous	6	450	2700