Multitasking covid safety system
The machine we are proposing here will be used for the offices, shopping malls & restaurants for covid safety, this machine will check human body temperature through the temperature sensor and sanitize hands by using fog sanitation system . Any person will not be provided entry without temperatu
2025-06-28 16:28:38 - Adil Khan
Multitasking covid safety system
Project Area of Specialization Electrical/Electronic EngineeringProject SummaryThe machine we are proposing here will be used for the offices, shopping malls & restaurants for covid safety, this machine will check human body temperature through the temperature sensor and sanitize hands by using fog sanitation system . Any person will not be provided entry without temperature and mask scan. Only person having both conditions is instantly allowed inside. As the manual supervison is not so effective, this system will make sure that no one is allowed through the entrance without mask, temperature scan and hand sanitation. The system uses temperature sensor and camera connected with a raspberry pi system to control the entire operation.
Project ObjectivesThe main objective of this project will be to replace intellectual persons and devices to perform multiple tasks at the same time. This machine is helpful under the circumstances of preventing the spread of covid, besides it is also helpful in keeping the environment hygienic and healthy. To design and build the system using raspberry pi and sensors.
Project Implementation MethodTo solve our problems we here propose a fully automated temperature scanner and entry provider system. It is a multi purpose system that has a wide range of applications. The system makes use of a contactless temperature sensor, hand sanitization and a mask monitor. The scanner is connected directly with a human barrier to bar entry if high temperature or no mask is detected. Any person will not be provided entry without temperature and mask sense. Only person having both conditions is instantly allowed inside. • User will insert hands for sanitization through fog. • Temperature sensor will sense human body temperature • Mask scanning will be done by the camera • Then the door will be unlocked, Any person will not be provided entry without temperature and mask scan. Only person having both conditions is instantly allowed inside
Benefits of the Project- Helpful In Prevention Of Spread Of Covid19.
- Lesser Human Interaction.
- Clean And Hygienic Enviroment.
- Water saving.
- Secure Entrance.
- Time saving.
We Are Proposing A System Which is mainly to overcome the spread of covid-19 and to keep the enviroment hygenic and healthy,
Firstly we are using raspberry pi 4 model b to operate our sytem. camera, temperature sensor, ultrasonic humidifiers, servo motor will be connected to raspberry pi.
Humdifers will be used for hand sanitation then temperature sensor will sense human body temprature,then the camera will scan for the mask.
if all the conditions are fullfilled then the barrier will be lifted with the help of servo motor and the green light will be turned on, if the conditions are not matched the buzzer siren will be turned on along with the red light the barrier will not be lifted and the person will not be allowed inside.
Final Deliverable of the Project HW/SW integrated systemCore Industry HealthOther IndustriesCore Technology Internet of Things (IoT)Other TechnologiesSustainable Development Goals Good Health and Well-Being for People, Clean Water and SanitationRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 43900 | |||
| Raspberry pi 4 model b | Equipment | 1 | 26000 | 26000 |
| DS1820 Temperature Sensor | Equipment | 1 | 400 | 400 |
| Ultrasonic Humidifier | Equipment | 3 | 900 | 2700 |
| ESP 32 Cam | Equipment | 1 | 1600 | 1600 |
| Buzzer Siren | Equipment | 1 | 200 | 200 |
| Red And Green Indicator | Equipment | 2 | 500 | 1000 |
| HS 3225 Servo Motor | Equipment | 1 | 3500 | 3500 |
| Barrier & Frame | Miscellaneous | 1 | 2000 | 2000 |
| Base Frame | Miscellaneous | 1 | 2500 | 2500 |
| Mounts & Joints | Miscellaneous | 1 | 1500 | 1500 |
| Supporting Frame | Miscellaneous | 1 | 1500 | 1500 |
| Wires & Connectors | Miscellaneous | 1 | 1000 | 1000 |