Load Management System For End User In Microgrid
The main purpose of our project is to generate green energy and manage the load on demand side in DC microgrid in order to make system efficient. For generation we are focusing on Solar and Wind sources.With rapid smart micro-grid technology and Solar Photovoltaic (PV) system development, the end us
Project Title
Load Management System For End User In Microgrid
Project Area of Specialization
Project Summary
The main purpose of our project is to generate green energy and manage the load on demand side in DC microgrid in order to make system efficient. For generation we are focusing on Solar and Wind sources.With rapid smart micro-grid technology and Solar Photovoltaic (PV) system development, the end users (consumers) respond inefficient and imbalance in between power demand and power generation along with battery bank (BB). Our project will control power flow to the consumer. Demand Side Energy Management(DSEM) system for end user in autonomous micro-grid by load balancing and data acquisition reduce the gap between generation and end-user demand in addition for research works. The Project have been designed and examined in professional simulation software. It is also shown that proposed DSEM system is efficient to include more consumers. Power theft can be detected and eliminated in this system.The main purpose of our project is to generate green energy and manage the load on demand side in DC microgrid in order to make system efficient. For generation we are focusing on Solar andWind sources.With rapid smart micro-grid technology and Solar Photovoltaic (PV) system development, the end users (consumers) respond inefficient and imbalance in between power demand and power generation along with battery bank (BB). Our
project will control power flow to the consumer. Demand Side Energy Management(DSEM) system for end user in autonomous micro-grid by load balancing and data acquisition reduce the gap between generation and end-user
demand in addition for research works. The Project have been designed and examined in professional simulation software. It is also shown that proposed DSEM system is efficient to include more consumers. Power theft can be detected and eliminated in this system.
Project Objectives
The main goal of the project is to investigate generation from solar and wind and Demand Side Management in DC microgrid. Following are the objectives:
- To design a load management system designed to control the DC micro-grid by load balancing and managemen for more consumers.
- To make the system stable.
- Prevent power theft.
Project Implementation Method
The project includes devising possible improvements in microgrid because there is no load management or
regulation system or over load protection is available there. First of all we will generate power from two sources
that are solar and wind and then we will store that power in battery with the help of solar and wind charge controller.
Then we will move towards the implementation of our main task that is load management section. There
we will use current sensors to monitor loads of all the connected consumer and relays will be used to On or Off
the loads according to their alloted power. The planning of making of this project is to design and implement
such a smart demand side management for a micro/nano grid that can monitor, detect and eliminate overloaded
consumer in the grid and at the same time making the micro grid more efficient than the traditional systems.
Benefits of the Project
Following Are the main benefits of our project:
- Power theft can be detected and eliminated in this system.
- Automatic Power shut down to consumer in case of overload.
Technical Details of Final Deliverable
Our project technical details are as follows:
- 12V, 15W generation from solar.
- 12V, 15W generation from Wind.
- Power flow depending on pre-defined value.
- 5v to 12v loads.
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| ACS712 Current sensor | Equipment | 3 | 280 | 840 |
| 5V DC Relay | Equipment | 4 | 150 | 600 |
| Solar Panel | Equipment | 1 | 1400 | 1400 |
| LCD | Equipment | 1 | 220 | 220 |
| Arduino board | Equipment | 1 | 680 | 680 |
| 12 v battery | Equipment | 1 | 1500 | 1500 |
| ICs | Equipment | 4 | 100 | 400 |
| Stationary | Miscellaneous | 50 | 5 | 250 |
| PCB Board | Equipment | 1 | 400 | 400 |
| Pulley | Equipment | 1 | 500 | 500 |
| Motor | Equipment | 1 | 500 | 500 |
| DC loads | Equipment | 8 | 100 | 800 |
| Total in (Rs) | 8090 |
If you need this project, please contact me on contact@adikhanofficial.com
Goods Delivery Drone
The rapid increase in usage of online ordering has increased the need of manpower to deliv...
Speaker Recognition System
Speaker Recognition is the task of recognizing the speaker from his/her voice. The techniq...
Design and fabrication of motor controlled finger with single degree o...
The main aim of the current project is to restore the functionality of the lost fingers. I...
Deep Learning Based Chatbot for Legal Assistance
This app is basically a chatbot based on specific Pakistani law. People who are facing pro...
Design and Development of Industrial Delta Robot
Packaging, medical and pharmaceutical industries tend to face the challenge of producing a...