IOT Based Hybrid wind and Solar charge controller
Our project (IoT Based Hybrid charge controller with Raspberry Pi).The continuous expansion of society, human hold increasingly demands more to the world?s energy sources. Generally there are two available methods of electrical power generation. First, by utilizing non?renewable (i.e
Project Title
IOT Based Hybrid wind and Solar charge controller
Project Area of Specialization
Project Summary
Our project (IoT Based Hybrid charge controller with Raspberry Pi).The continuous expansion of society, human hold increasingly demands more to the world’s energy sources. Generally there are two available methods of electrical power generation. First, by utilizing non–renewable (i.e. conventional) energy resources such as coal, oil, gas, etc. Second, electrical power generated from renewable (i.e. non-conventional) energy resources such as solar, wind, hydro, tidal, biomass, geothermal, etc. Currently, electrical power is generated by centrally operated bigger generating units which are connected in a grid. These generating units are mostly installed at the outskirts of the big cities or in areas nearby to energy resource centers. These units produce energy by burning conventional resources of fuel which produces greenhouse gases as byproduct during combustion process.
Project Objectives
Our project objectives are shown below:
The first and main objective of our project is minimizing the energy crisis and in a cheap cost.
30% of the Pakistan's population in remote areas has no access to this unavoidable source of energy because of their far distant from the grid. Through this motive we will reduce this issue.
It is Eco-friendly and doesn't impact on the environment.
Project Implementation Method
Our project implementation method is easy and simple structure. This is based on IoT and sensors, which makes it efficient.The IoT send data through Gsm/wifi module to the cloud.Also Energy storage system (ESS) is used for the backup.
Benefits of the Project
There are three main benefits of our project
1)The first is minimizing the energy crisis and in a cheap cost.
2) This system can be installed on the outside at any where.
3)These sources are easily available at any where in a low coast.
Technical Details of Final Deliverable
Use of IoT help us to make system efficient and good.
Energy storage system (ESS) also installed because when both of these are sources are goes down, then we will use ESSs.
This system installed at open surface where sun light and wind is available.
Final Deliverable of the Project
Type of Industry
Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| DHT-11 | Equipment | 1 | 200 | 200 |
| U couple module | Equipment | 1 | 140 | 140 |
| LDR | Equipment | 3 | 60 | 180 |
| Limit Switch | Equipment | 3 | 40 | 120 |
| Raspberry Pi 3 | Equipment | 1 | 5000 | 5000 |
| Casing | Equipment | 1 | 450 | 450 |
| 16GB SD card | Equipment | 1 | 450 | 450 |
| HDMI to VGA Converter | Equipment | 1 | 300 | 300 |
| 5 | Equipment | 1 | 4700 | 4700 |
| Wind Motor | Equipment | 1 | 1000 | 1000 |
| Gear Motor | Equipment | 1 | 1500 | 1500 |
| Solar Plate | Equipment | 1 | 7000 | 7000 |
| Arduino | Equipment | 1 | 400 | 400 |
| 16×2 LCD | Equipment | 2 | 200 | 400 |
| Buck Module | Equipment | 1 | 120 | 120 |
| Boost Module | Equipment | 1 | 120 | 120 |
| Buzzer | Equipment | 10 | 13 | 130 |
| Voltage sensor | Equipment | 1 | 100 | 100 |
| Current sensor | Equipment | 1 | 250 | 250 |
| DC voltmeter | Equipment | 3 | 180 | 540 |
| Push button NO/NC | Equipment | 6 | 170 | 1020 |
| Frame | Miscellaneous | 1 | 10000 | 10000 |
| Wires | Equipment | 3 | 120 | 360 |
| Battery | Equipment | 1 | 4500 | 4500 |
| Wind turbine | Equipment | 1 | 3500 | 3500 |
| Other | Equipment | 1 | 5000 | 5000 |
| Total in (Rs) | 47480 |
If you need this project, please contact me on contact@adikhanofficial.com
Design and Development of Energy Efficient Synchronous Reluctance Moto...
A synchronous reluctance motor is motor with no rotor winding. We will design the synchron...
Automatic Accident Detection and Messaging the Rescue System
The Rapid development of innovation and foundation has made our lives simpler. The approac...
Umeed
We are developing an organizational charity app in which we are going to introduce differe...
Smart Automated Home
smart automated home project is named as smart as the project is based on intelligent syst...