implement and design smart locker based on otp and fingerprint

The locker designed using fingerprint sensor, buzzer alarm, micro camera, node mcu and vibration sensor is based on Arduino. Fingerprint sensor As soon as the place finger match with the registered fingerprint, then in 30 seconds an otp code is generated and sent to the registered number. In 1 minut

Project Title

implement and design smart locker based on otp and fingerprint

Project Area of Specialization

Internet of Things

Project Summary

The locker designed using fingerprint sensor, buzzer alarm, micro camera, node mcu and vibration sensor is based on Arduino. Fingerprint sensor As soon as the place finger match with the registered fingerprint, then in 30 seconds an otp code is generated and sent to the registered number. In 1 minute the code is entered via keypaid. If the otp code is valid then we receive a confirmation message on registered mail and if we press the ok button then the Lock Will open,with confirmation message we will also receive a picture of that person who open the lock.If the otp or fingerprint is wrong then  The buzzer will ring till the 15second and an alert message will be sent to the mail and number. If anyone tries to break the locker, the buzzer will ring and also send alert message on registered number and email.

Project Objectives

High security locks are designed to provide a greater level of protection against the primary methods of attack that are employed by criminals, saboteurs, and spies – both outside of a protected area and from within by employees, service personnel, or those who may have or gain access to one or more locks.

Smart lockers are secure storage and distribution systems with integrated computers and sensor networks that allow them to automate package selection, notification, and delivery. In the case of IT equipment, for example, smart lockers enable IT Support Teams to quickly and easily secure, manage and distribute hardware.

Secure locker systems are a great tool for tracking regulated items that are at risk of internal theft, like narcotics in hospitals or in EMT agencies. Secure lockers work well for tracking any kind of regulated asset.
Biometric identifier is an objective measurement of a physical characteristic of an individual which, when captured in a database, can be used to verify the identity or check against other entries in the database.Fingerprint authentication automatically compares a user's fingerprint to a stored fingerprint template in order to validate a user's identity.
 A One-time password (OTP) based smart locking system using Arduino can generate a new password every time you try to unlock it, which gives you extra security. A key-based locking system has now become outdated because if your key is lost or stolen, it creates a huge problem.
IoT security is the technology segment focused on safeguarding connected devices and networks in the internet of things .

Project Implementation Method

Arduino is used as central controller all components are connected with it.The fingerprintscanner is
used to scane the fingerprints of an authorized person to unlock our Lock. Once
the scanner determines that the person is  authorized user, it prompts to input
a  OTP code which is generated by Node MCU.If fingerprint in
 not valid then it will send a message that an unauthorized person is trying to
 unlock the lock.NodeMCU will connect us to the lock system using the Internet. This allows
 us to unlock our lock by using a smartphone from anywhere in the world. Node MCU provide IOt services , we use the website IOT.spt.com as server.All information is stored on this website. The
 Node MCU generate an OTP code to unlock the lock system, the OTP code is
 enter in one minute ,if three times the OTP code are wrong entered then it send a
 message to authorized person and alarm the buzzer. If the OTP is correct then
 it send link on gmail when we open the link  the locker will open.

Benefits of the Project

It is a highly secure system. It's keyless system, so don't worry about losing your keys. It's very secure because vibration sensors generate alerts and messages on the mail ID and number if someone tries to break into the locker. By using this system, we can easily caught thif it with the help of a tiny camera. It is better than other systems because if we lose our sim card our security system will not be disturbed because we use the mail id for confirmation. It provides double security either physically or texting your locker if you are near the locker you can hear alert buzzer alarm if you are not near to the locker you recive sms on your number as alert meesage because if someone tries to open your locker then it will generate a buzzer alert and send a text message. The system is user friendly and easy to use. It provides the ability to record data, you can see how many times and when the locker was opened.A Normal person can purchase it because not much costly and provide the heigh security as compare to other system which are base on GSM module.

Technical Details of Final Deliverable

We made a highly secure smart locker based on OTP and fingerprint sensor. We use different security checks to protect the lockers. Here we use different modules like Arduino Uno, Fingerprint Sensor, Micro Camera, Electronic Bolt Lock, Node MCU, Keypad and LCD. First the fingerprint sensor scans the fingerprint, if it matches the stored data,  then the node MCU will generate an OTP, we will receive this otp on our registered mobile number, even if the OTP is wrong, the buzzer will start wringing , we receive a message that someone is trying to open the lock, after applying otp we will receive confirmation message on mail that you want to open the lock and the lock will open after confirmation. We also used a hidden tiny camera that takes a picture of the person how trying to open the lock, if it's an unauthorized person then this picture will help us find that person so we can be careful next time. We also used a vibration sensor in it, so even if someone tried to break the lock with something heavy, the alarm would start going off. In this way we secure our Locker.

Final Deliverable of the Project

Hardware System

Core Industry

IT

Other Industries

Security

Core Technology

Internet of Things (IoT)

Other Technologies

Artificial Intelligence(AI)

Sustainable Development Goals

Responsible Consumption and Production

Required Resources

If you need this project, please contact me on contact@adikhanofficial.com