Design of Solar Powered Quadcopter

The project titled ?design of solar-powered quadcopter? aims to develop a hybrid solar-powered quadcopter, that will fulfill its energy needs from the sun and a battery. This project provides the solution to the short time of flight of quadcopter by using the energy from the sun that is clean and se

Project Title

Design of Solar Powered Quadcopter

Project Area of Specialization

Mechatronics Engineering

Project Summary

The project titled “design of solar-powered quadcopter” aims to develop a hybrid solar-powered quadcopter, that will fulfill its energy needs from the sun and a battery. This project provides the solution to the short time of flight of quadcopter by using the energy from the sun that is clean and self-sustaining. The design of this project will be the same as that of a simple quadcopter but instead of using a battery as the sole energy source, solar cells will also be used.

            As applications of the multirotor depend upon their time of flight so by increasing their time of flight their application range can be increased greatly. Currently, quadcopters are being used for parcel delivery over short distances, industrial monitoring, videography, surveillance, and in agriculture as a sprayer, etc. But this application range can be greatly increased by increasing the time of flight. Hence, if this idea is used for multirotors commercially, it will greatly increase the application range of quadcopters.

Project Objectives

Following are the objectives of this project:

1. To design the frame and propellers of a quadcopter.
2. To analyze the design of the frame and propeller.
3. To manufacture a quadcopter harvesting its energy requirements from the sun.

Project Implementation Method

The project will be accomplished in the following steps:

1. The first step is the selection of an aim and thrust to weight ratio for the quadcopter. After the selection of thrust to weight ratio for the quadcopter, a combination of motors and solar panels will be obtained that will satisfy the fixed thrust to weight ratio.
2. After the selection of motors and solar panels is done, the specification of other components will be done. Then the design will be check theoretically while considering all the inefficiencies of the electrical components.
3. After the theoretical check, a propeller will be designed according to the needs of the motor selected and a CREO model will be prepared for the quadcopter. Then the structural analyses will be performed on the frame. Propeller performance and propeller motor combination analyses will be done.
4. After the successful designing and software analyses of the design, a wooden model will be prepared to test out the design manufacturing feasibility.
5. Then the final step will be to fabricate a frame and assemble all the parts.

Benefits of the Project

This project addresses the major problem of small time of flight of multi-rotors encountered by the multirotor industry. The project presents a solution to the problem by introducing the use of a supplementary power source along with the battery in the drones. The supplementary power source used in this project is solar power. This will greatly increase the time of flight of the quadcopter. This increase in time of flight of the quadcopter will increase the range of its applications from small distance parcel delivery and videography to long-distance parcel delivery, first aid rescue missions, disaster monitoring, surveillance, etc.

Technical Details of Final Deliverable

A solar-powered quadcopter is a multi-rotor that will harvest some of its energy needs from the sun. It will do so by using a solar cell array mounted on it. Just like normal UAV, it will be able to hover and will be capable of vertical take-off and landing but it will have an increased time of flight as compared to other multirotors available in the market. The difference will be that its size will be a bit larger than other quadcopters. The final deliverable includes a solar-powered quadcopter that is capable of supplementing some portion of its energy needs from the sun. It’s this capability of not relying fully on upon on the sun will allow it to have a longer time of flight. The longer time of flight will increase the narrow range of applications of the project from parcel delivery and videography to first-aid missions, long hour surveillance, and industrial monitoring. The final deliverable hardware will include motors, electronic speed controller, power distribution board, receiver, transmitter, frame structure, solar cells, propellers, and charge controller.

Final Deliverable of the Project

Hardware System

Core Industry

Others

Other Industries

Media , Security

Core Technology

Robotics

Other Technologies

Clean Tech

Sustainable Development Goals

Industry, Innovation and Infrastructure, Climate Action

Required Resources

If you need this project, please contact me on contact@adikhanofficial.com