Design Fabrication and control of a stair climbing wheelchair phase III
This project describes the designing and fabrication of staircase climbing wheelchair.The Portable Electric Stair Climbing Wheelchair is used to help persons with reduced mobility go up and down the stairs and perform dual function electric wheelchair on stair and manual on ground,there are fle
2025-06-28 16:26:26 - Adil Khan
Design Fabrication and control of a stair climbing wheelchair phase III
Project Area of Specialization Mechanical EngineeringProject SummaryThis project describes the designing and fabrication of staircase climbing wheelchair.The Portable Electric Stair Climbing Wheelchair is used to help persons with reduced mobility go up and down the stairs and perform dual function electric wheelchair on stair and manual on ground,there are flexible handles at the bottom, easy for carrying patients in narrow space. This electric stair climbing wheelchair can carry load <160kg . This device can ascend or descend almost any type of stair from spiral staircases to wood or stone step surfaces without wear and tear. It does not require pre-installation track. The tracking system grips the stairs to ensure a solid contact and moves along each stair with smooth and quiet operation. The passenger remains in a natural upright position.It can Used in home for old people, school security, hospitals, hotels etc for emergency evacuation.
Project Objectives- To design and fabricate a wheelchair that will move and turn on ground as well as on stairs.
- Decrease its weight by using light material (aluminum alloy)
- Make it portable to easily move from one place to another.
- To design wheelchair having maximum load bearing capacity up to 80kg.
- Literature review of this project to make understating
- Calculation was done regarding the force acting on the frame and power requirement as well.
- Design model on 3D software (creo parametric)
- Stress and shear analysis
- Fabrication are under the calculated senerio.
- At the end Assembly job was done to finalize the project.
- Electric wheelchair on stair and manual wheelchair on ground.
- It can climb up and down stairs smoothly and steadily by track.
- Easy to fold , go where you want
- Requires minimal maintenance
- Can be used as stretcher
- Can be used on various stairways within a building
- Easily stores in a secure area when not in use
- Can be used when electrical power fails or is not available
Material :-
Alumnium alloy
Motor:-
Voltage=24v
Power=250w
Current =10.42A
Rated speed=3000rpm
Carrying capacity :-
?160kg
Battery:-
24v
Recharge time:-
4-6 hour
Folding size:-
115*50*27cm
Unfold size:-
110*50*160CM
Final Deliverable of the Project Hardware SystemCore Industry ManufacturingOther IndustriesCore Technology OthersOther TechnologiesSustainable Development Goals Good Health and Well-Being for People, Quality Education, Industry, Innovation and InfrastructureRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 76100 | |||
| Material cost(alumnium alloy) | Equipment | 1 | 15000 | 15000 |
| wheels | Equipment | 1 | 3500 | 3500 |
| Conveyer belts | Equipment | 1 | 5000 | 5000 |
| Battery | Equipment | 1 | 10000 | 10000 |
| powder Paint | Equipment | 1 | 3500 | 3500 |
| Nut+Bolt+Washer | Equipment | 1 | 900 | 900 |
| Seats cushioning | Equipment | 1 | 2200 | 2200 |
| Switch+Wiring | Equipment | 1 | 1500 | 1500 |
| Machining Cost | Equipment | 1 | 14000 | 14000 |
| Assembly Cost | Equipment | 1 | 6000 | 6000 |
| Motor | Equipment | 1 | 8200 | 8200 |
| Printing | Miscellaneous | 1 | 2000 | 2000 |
| book Binding | Miscellaneous | 1 | 1500 | 1500 |
| overhead | Miscellaneous | 1 | 2800 | 2800 |