Construction of battery
In a batteries there are two types of plates that are used first one is negative plate and second one is positive plate.The positive one is consist of lead dioxide and negative one is consist of sponge lead. These two plates are separated by separator which is an insulating material.In the batteries
Project Title
Construction of battery
Project Area of Specialization
Project Summary
In a batteries there are two types of plates that are used first one is negative plate and second one is positive plate.The positive one is consist of lead dioxide and negative one is consist of sponge lead. These two plates are separated by separator which is an insulating material.In the batteries there one or more cells are used and each cell is of 2.1 volt.
Project Objectives
To study the basic introduction of battery.
To study the various types of battery and their function.
To study the brief study of construction of battery.
Project Implementation Method
Once the battery is at stable temperature, the temperature from the heater is also stable.The word battery simple means a group of similar components. In military vocobularly, a battery refers to a cluster of guns.A battery technology in particular are as imperative as humanity transition to a renewable energy economy.
Benefits of the Project
No noise or air pollution.
Improve the image of company.
Reduce waste and waste handling costs
Reduce electrical energy cost with flexible, efficient and productive battery management.
Energy security.
Getting the most out of your power.
Technical Details of Final Deliverable
A battery is a device that store chemical energy and convert it into electrical energy.All the battery are made up of three main components first one is anode (-ve side) , second one is cathode (+ve side) and the third one is electrolye. When a anode and cathode are connected to a circuit , a chemical reaction takes place between and and electrolyte. When the material in the anode or cathode is consumed or no longer able to be used in the reaction, the battery is unable to produce electricity. At that point the battery is dead
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Miscellaneous | Miscellaneous | 1 | 10000 | 10000 |
| Total in (Rs) | 10000 |
If you need this project, please contact me on contact@adikhanofficial.com
Pure sine wave inverter
Pure Sine Wave is obtained as output from UPS and utilized as energy source as stand alone...
Multi Source Hybrid Cart
Project Objectives (less than 2500 characters)
Sewerage Detection System
As everyone know that the sewerage condition of our country is very bad especially during...
VOICE AND IMAGE FEEDBACK CONTROL ROBOTIC ARM
Robotics always remains a major interesting field in the scientific community. Robots are...