AUTOMATIC TEMPERATURE AND MASK SCANING, DISINFECTION SYSTEM FOR COVID-19

Project Title

AUTOMATIC TEMPERATURE AND MASK SCANING, DISINFECTION SYSTEM FOR COVID-19

Project Area of Specialization Artificial IntelligenceProject Summary

We are designing “Automatic Temperature and Mask Scanning Disinfection System for Covid-19”. In this project we are going to make a system that will scan the person at the entry of any crowded place where we want to make sure the proper implementation of SOPs. There will be a camera at the entry point that will determine whether the person having mask or not on his face based on that image the computer will allow the person if he/she wearing mask and allow to enter the place if the person has no mask the computer will show the message to wear the mask also there will be a temperature sensor to determine to normal human body temperature. When both conditions are satisfied the barrier at the gate will allow the person to go inside. Now we have installed a disinfection box inside the place in which the people will put there mobiles, wallets, keys etc. and the box will disinfect that object.

Project Objectives

The objectives of the project are:

• Objective #1: Image processing and machine learning for mask detection.
• Objective # 2: Temperature detection.
• Objective # 4: Automatic Barrier entry.
• Objective # 3:  Automatic hand sanitization.
• Objective # 5: Disinfection box.

Project Implementation Method

• Image processing and machine learning for mask detection.

In this part we will implement machine learning algorithm to detect the mask on the face with the help of tensor flow and OpenCv.

• Temperature detection.

The sensor will measure the body temperature if the temperature is greater than 37 degree Celsius of less, the barrier will not open and the system will suggest for medication and if the temperature is normal (37C) the barrier will open.

• Automatic hand sanitization.

It will sanitize the hands without human touch. There are some motors connected with Arduino that will get command through the raspberry pi.

• Disinfection box.

In this box there are UV-light which is very effective to kill the germs.

Benefits of the Project

• Smart SOPs implementation.
• Reduce the Covid-19 spread.
• Reduce the risk of life.
• No human involvement is required.

Technical Details of Final Deliverable

• Raspberry pi.
• Camera.
• Temperature sensor.
• Arduino UNO.
• Motorized barrier.
• Disinfection box.
• Automatic hand sanitizer.

Final Deliverable of the Project HW/SW integrated systemCore Industry HealthOther IndustriesCore Technology Artificial Intelligence(AI)Other TechnologiesSustainable Development Goals Good Health and Well-Being for PeopleRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	22750
Raspberry pi-3	Equipment	1	14000	14000
Arduino Uno	Equipment	1	1700	1700
Servo motor	Equipment	2	400	800
Camera	Equipment	1	5500	5500
UV lights	Equipment	5	150	750