Smart tree
Our project is inspired by the nature as Wind Energy is the fastest source of producting Electricity in the world.The energy from the wind is used to generate Electricity with the help of Aero leaves.These tree shaped aero leaves covered with mini turbines are able to generate power with minimum win
2025-06-28 16:29:25 - Adil Khan
Smart tree
Project Area of Specialization Electrical/Electronic EngineeringProject SummaryOur project is inspired by the nature as Wind Energy is the fastest source of producting Electricity in the world.The energy from the wind is used to generate Electricity with the help of Aero leaves.These tree shaped aero leaves covered with mini turbines are able to generate power with minimum wind speed of 7kmph.We are also using Solar plates as auxiliary power that serves as a backup for primary source and can be used in case of stopage of wind system.
Project ObjectivesTo design and febricate wind turbine by using vertical axis wind turbines that can generate power under relatively low wind velocity.
Analyze how different geometery of wind turbine can affect the output power of wind turbine.
Project Implementation MethodVertical axis wind turbine are used for the implementation of this project.
Our main purpose is to suggest best design of Aero Leaf with can give maximum output for low wind speed.
we study differnt research papers and analyise the data of horizontal wind turbine and vertica wind turbine.
Also which geometry of Aero leaf will give maximum output.
Aluminium will be used for the manufacturing of aero leaf so that it will be light weighted.
stainless steel will be used for the structure and branches of smart tree.
we will use converter to step up the dc level.
Batteries will be used to store energy.
And iverter will be used for ac loads.
Benefits of the ProjectIt work silently with least noise.
No emission of green hosue gases.
Installed on low power electronic applications.
It is a grid independent system.
Technical Details of Final DeliverableIn this project we are going to generate 500w power from different renewable energy resources.
our project is a physicall tree that can genearate electricity.
This tree like structure have six branches.
Five of them having spherical strucuture leaves works as vertical axis wind turbines and producing energy almost 100w at average speed of wind.
One branch having solar pannel having power 250W.
We used a bettery to store energy.
Installed a inverter having rating 300watt and ran the ac loads like fan and bulb etc.
Final Deliverable of the Project Hardware SystemCore Industry Energy Other IndustriesCore Technology Clean TechOther TechnologiesSustainable Development Goals Good Health and Well-Being for People, Affordable and Clean EnergyRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 65000 | |||
| Turbines and Generators | Equipment | 5 | 7200 | 36000 |
| solar plate | Equipment | 1 | 7000 | 7000 |
| Mechanical structure | Equipment | 1 | 2500 | 2500 |
| Power IGBTs | Equipment | 3 | 1000 | 3000 |
| Capcitors | Equipment | 2 | 500 | 1000 |
| Mutli-winding transformer | Equipment | 1 | 10000 | 10000 |
| Heat sink | Equipment | 3 | 150 | 450 |
| Power Mosfets | Equipment | 2 | 775 | 1550 |
| wind turbine Controller | Equipment | 1 | 3500 | 3500 |