Dymanic voltage restorer are used to mitigate sag and swell of voltage at distribution system due to addition of large capacitive and inductive load and also used to reduce harmonics of voltage it spend most of the time in stand by mode and mitigate voltage sag and swell only at
Power quality inhancement in distribution system by designing of dynamic voltage restorer
Dymanic voltage restorer are used to mitigate sag and swell of voltage at distribution system due to addition of large capacitive and inductive load and also used to reduce harmonics of voltage it spend most of the time in stand by mode and mitigate voltage sag and swell only at the time it occurs and also reduce the harmonics. It is used to inhance the power quality. It is used in real time application e.g on a grid station.
To detect and compassionate sag and swell of voltage (A.C) and also reduce harmonic to improve the power quality.
1.Simulation on MATLAB simulink and compare it with the traditional system.
2.hardware implementation.
3.real time integration of the system.
1.mitigate voltage sag in the distribution system.
2.mitigate voltage swell in the distribution system.
3.reduce harmonic.
4.improve power quality in the distribution system.
5. It Operates only when fault occur otherwise remains in stand by mode.
TMS320F28335 controller
IGBT's
Battery
Switching circuit
Coupling Transformer
Super capacitor
PCB
Distribution feeder
SCR module
Current sensor
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| TMS320F28335 | Equipment | 1 | 12000 | 12000 |
| Battery | Equipment | 1 | 8050 | 8050 |
| Coupling transformer | Equipment | 3 | 600 | 1800 |
| IGBT converter/inverter | Equipment | 6 | 450 | 2700 |
| Super capacitor | Equipment | 1 | 1000 | 1000 |
| SCR module | Equipment | 1 | 4500 | 4500 |
| PCB | Equipment | 5 | 500 | 2500 |
| Current sensor | Equipment | 3 | 500 | 1500 |
| 12V Battery | Equipment | 1 | 400 | 400 |
| Connecting wire and jumper wire | Equipment | 50 | 12 | 600 |
| Bread board | Equipment | 2 | 200 | 400 |
| Project body | Equipment | 1 | 2000 | 2000 |
| TMS320F28335 | Equipment | 1 | 12000 | 12000 |
| Battery | Equipment | 1 | 8050 | 8050 |
| Coupling transformer | Equipment | 3 | 600 | 1800 |
| IGBT converter/inverter | Equipment | 6 | 450 | 2700 |
| Super capacitor | Equipment | 1 | 1000 | 1000 |
| SCR module | Equipment | 1 | 4500 | 4500 |
| PCB | Equipment | 5 | 500 | 2500 |
| Current sensor | Equipment | 0 | 0 | 0 |
| 12V Battery | Equipment | 0 | 0 | 0 |
| Connecting wire and jumper wire | Equipment | 0 | 0 | 0 |
| Bread board | Equipment | 0 | 0 | 0 |
| Project body | Equipment | 0 | 0 | 0 |
| Total in (Rs) | 70000 |
The Purpose of this SRS is to write about the system requirements and other pre-build even...
You must have seen public transport outside universities and every other institute, even w...
In today era in which high speed and wide bandwidth is the primary need of every sta...
We want to make a prototype, that will be a Mobile Application . It will help PAKISTAN's S...
The project Inventory Management System is a complete web based application An inventory m...