Power management and monitoring of solar PV through sensor using IOT

A solar monitoring system can help make you more aware of your PV system?s performance. It offers information about energy consumption and generation, optimizing energy usage, and damage to your solar system, among other topics. It?s important to monitor your solar setup in some manner ? without mon

Project Title

Power management and monitoring of solar PV through sensor using IOT

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

SUMMARY

A solar monitoring system can help make you more aware of your PV system’s performance. It offers information about energy consumption and generation, optimizing energy usage, and damage to your solar system, among other topics. It’s important to monitor your solar setup in some manner – without monitoring, it can be difficult to figure out if your solar panels are operating at their best or not.

Project Objectives

OBJECTIVE

• Flexible Charge Controller
• Power Management And Monitoring Of Load
• Controlling Of Load
• Notification Of Over Load
• Internet Of Things (Iot)

Project Implementation Method

METHOD

• Arduino controller
• Power supply
• WiFi module
• Charge controller
• Relay module
• Solar panel
• Current sensor
• Voltage sensor 
• Data Base

Arduino controller

We used microcontroller name arduino mega 2560 its new updated microcontroller and can be used for multi tasking programmed.

Power supply

´To operate our project circuitry we used 5v 2A power supply module which provide 5v from 12v dc source.

WiFi module

´To connect our circuitry with internet we used WiFi module to update status  and sending notification to operator.

Charge controller

´We design charge controller using relay module logic for controlling and management of load

Current Sensor

´It is used to measure  load current.

Voltage Sensor

´It is used to measure the voltage of load and solar panel.

Block diagram

Benefits of the Project

PROJECT BENEFITS:

AVALIABLE CHARGER CONTROLLER ARE LOAD DEPENDENT I.E 1KW,2KW AND SO ON.

NOT EXISTING ANY MECHANISM FOR MONITORING AND MANGEMENT

NOTIFICATION AND UPDATION 

Technical Details of Final Deliverable

TECHNICAL DETAILS:

WE DESIGN FLEXIABLE CHARGE CONTROLLER

USING SENSOR WE CAN MONITOR AND CONTROLLED THE LOAD

FOR NOTIFICATION AND UPDATION WE USED WIFI  MODULE ALSO USED FOR IoT.

Final Deliverable of the Project

Hardware System

Core Industry

Energy

Other Industries

Others

Core Technology

Internet of Things (IoT)

Other Technologies

Others

Sustainable Development Goals

Affordable and Clean Energy

Required Resources

If you need this project, please contact me on contact@adikhanofficial.com