Poultry Farm Automation

Project Title

Poultry Farm Automation

Project Area of Specialization Internet of ThingsProject Summary

According to the World Watch Institute, 74 percent of the world's poultry meat, and 68 percent of eggs are produced intensively. One alternative to intensive poultry farming is free-range farming using lower stocking densities. Poultry producers routinely use nationally approved medications, such as antibiotics, in feed or drinking water, to treat disease or to prevent disease outbreaks. Some FDA-approved medications are also approved for improved feed utilization. Poultry farming has become one the most important aspects of agriculture.

The main challenges of the indigenous poultry sub-sector include low genetic potential, low productivity, poor feeding with little supplementation, diseases, poor management and lack of organized market.

 Due to given challenges we make an environment friendly system which increase the high productivity, low labor cost and will be a significant reduction in diseases. As we known mostly diseases are due to lack of unproper cleaning system, which effect the chicks and get infected. We provide water, feed, cleaning and temperature maintaining system.

Project Objectives

Automation Poultry Farm system is control:

1. Water controlling
2. Controlling Feed overdose
3. Maintain cleanliness
4. Maintain the desire temperature
5. Reduce the labour cost & effort
6. Reduce the electricity’s expenses

Project Implementation Method

For implementation of this project, we will require hardware and software module.

• In hardware Arduino device, Temperature sensor, main structure of project, motors for providing feed, water and for making cleaning system, exhaust fan for maintain the entire temperature of the poultry farm are includes.

• In software

Functional programming language is used to interact with hardware.

C++

Benefits of the Project

The purpose of this project:

• To increase the productivity
• To reduce the feed overdose expenses
• Time constraints
• To reduce the labour cost
• To maintain the temperature
• To provide a clean environment
• Disease free environment
• automat lighting

Technical Details of Final Deliverable

We will use a Arduino device with which 4 motors are connected every motor is run on fix time which we set in the lcd of the Arduino device and off the given time. This working will be implemented on daily bases it means it run n auto mode as we set alarm on our phone and we hear alarm sound on daily bases.one motor provide feed in plates and second provide the water to the chicks.

3rd & 4th motor is connected with conveyer, 1st conveyer the waste of chicks to reach on 2nd conveyer, and then this 2nd conveyer this waste to reach out. One is temperature device, which sense the internal temperature. If the temperature is above to the our desire temperature then the exhaust fans are run and maintain the temperature.

Final Deliverable of the Project HW/SW integrated systemCore Industry HealthOther Industries IT , Agriculture Core Technology Internet of Things (IoT)Other Technologies RoboticsSustainable Development Goals Good Health and Well-Being for People, Responsible Consumption and Production, Climate ActionRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	76230
Arduino Module	Equipment	1	13000	13000
Temperature module	Equipment	1	8000	8000
Jump wires	Equipment	50	40	2000
Exhaust Fan	Equipment	3	700	2100
Motors	Equipment	5	550	2750
Buttons	Equipment	8	75	600
water provider system	Equipment	1	1100	1100
Breadboard	Equipment	2	350	700
Battery(Li-po)	Equipment	1	8500	8500
Display system	Equipment	2	750	1500
Electric controller circuit	Equipment	3	400	1200
Conveyor system	Equipment	1	1300	1300
Feed provider system	Equipment	1	1500	1500
Power Adapter	Equipment	1	1800	1800
Relay switch	Equipment	8	350	2800
Main Structure Box	Miscellaneous	1	6500	6500
Software developing	Equipment	2	9000	18000
Others	Miscellaneous	16	180	2880