Maximum Power Point tracking control of solar photovoltaic system

Maximum Power Point System also known as MPPT is an algorithm implemented on a Solar Power generation system. Its aim is to maximize the power output by tracking that point on the I-V curve of a solar panel that corresponds to the maximum generated output. The output from convention

2025-06-28 16:34:05 - Adil Khan

Project Title

Maximum Power Point tracking control of solar photovoltaic system

Project Area of Specialization Artificial IntelligenceProject Summary

Maximum Power Point System also known as MPPT is an algorithm implemented on a Solar Power generation system. Its aim is to maximize the power output by tracking that point on the I-V curve of a solar panel that corresponds to the maximum generated output. The output from conventional charge controllers is approximately 65-70 % of the ideal power generated, through this system that percentage goes up to 80-85 % by ultimately reducing cost and space consumption by an exponential level.

Project Objectives Project Implementation Method

The project uses a system of DC-DC converters to iterate through the I-V curve of a solar panel to find the point which corresponds to the maximum power generated. These iterations are controlled by a robust algorithm which implies artificial intelligence to determine the power level at different stages/points of said I-V curve. The point knows as MPP may change due to a number of factors i.e. irradiance, temperature etc. taking in view of these factors, the algorithm will keep on running to ensure that the power remains focused on the MPP, irrespective of the outside affecting factors.

Benefits of the Project Technical Details of Final Deliverable

The final hardware of the project would include a series of DC-DC Converters, a solar panel, a battery and load and an output screen which shows the power being generated. The algorithm would be running on the DC-DC converters and the MPP would be tracked by said algorithm, after the MPP has been tracked the next DC-DC converter will convert the voltage to the optimum value of the battery and will start charging it. The load will be supported by the battery being charged by the MPPT system.

Final Deliverable of the Project Hardware SystemType of Industry Energy Technologies Artificial Intelligence(AI)Sustainable Development Goals Affordable and Clean Energy, Industry, Innovation and Infrastructure, Sustainable Cities and CommunitiesRequired Resources
Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
Total in (Rs) 70650
Bread Board Equipment53001500
Capacitors Equipment160172720
Inductors Equipment200153000
Resistors Equipment160172720
Variable Resistors Equipment1080800
Wounded Inductors Equipment202304600
Wire Equipment1300300
Voltage Regulators Equipment301504500
FET's Equipment50452250
FET Drivers Equipment20901800
LEDs Equipment1010100
Wire Cutters Equipment28001600
Digital Multimeter Equipment135003500
Buck Converter Modules Equipment312003600
Boost Converter Module Equipment317005100
Single Board Micro controller Equipment3450013500
Solar Panel Equipment180008000
PCB Fabrication Equipment150005000
Bulbs (Load) Equipment2180360
Probes Equipment36501950
White Platforms Miscellaneous 25001000
Holders Miscellaneous 10550
Braces Miscellaneous 1020200
Registers Miscellaneous 2400800
Containers Miscellaneous 52001000
A4 Paper Bundle Miscellaneous 1700700

More Posts