Levitating Vertical Axis Windmill
Conventional vertical windmills are operating at very higher speed of air.And there are alot of frictional prroblems due to ball bearings. So there is a need of replacement of ball bearings to reduce friction and enhance efficiency.And to operate windmill at very low speed of air.
Project Title
Levitating Vertical Axis Windmill
Project Area of Specialization
Project Summary
Conventional vertical windmills are operating at very higher speed of air.And there are alot of frictional prroblems due to ball bearings.
So there is a need of replacement of ball bearings to reduce friction and enhance efficiency.And to operate windmill at very low speed of air.
Project Objectives
•To design a Maglev VAWT for low wind application.
•To fabricate a prototype
.Reduce the friction & eliminates need of bearings in vertical windmill
ØUse of Magnetic levitation
ØEnergy production.
Project Implementation Method
First of all we have been done literature drilldown .we hav been collected data about drawbacks of conventional vertical windmill.After that we make a cad modelling design .And then we will analyse it on ansys software where we will chek the best angle of attack of air to rotate the turbine on very low wind speed.And then we will febricate it and assemble it.
Benefits of the Project
1): These turbines are able to use winds with starting speed as low as 1.5m/s because of negligible friction achieved by magnetic levitation.
2): Also they could operate in winds exceeding 40m/s.
3):Has great future potential.
Technical Details of Final Deliverable
Project will levitate with the help of magnetic levitation on very low wind speed.
Components of project are as
1)Base
2)Magnets
3)Generator
4)Blades
5)Lower plate
6)Upper plate
7)Shaft
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Levitating frictionless Vertical Windmill | Equipment | 1 | 60000 | 60000 |
| Total in (Rs) | 60000 |
If you need this project, please contact me on contact@adikhanofficial.com
Smart Tracker For Vehicles Based On IOT
In our project, we are providing solutions usually to vehicle owners or car drivers w...
Glucometer
Glucometer, also referred as Glucose meter, is a device used to determine glucose concentr...
Sentiment Analysis on current government using Tweets
Most of our project is research based and focuses more on the backend of the system we are...
WATER BOARD PUMP ALERTING SYSTEM
The people of Karachi don?t have an automated system to inform/update them about the water...
Design and development of Android based three D printing using stepper...
This project contains mechanical knowledge , software knowledge as well as electrical know...