IMPLEMENTATION OF AUTO PARALLEL CAR PARKING SYSTEM

Project Title

IMPLEMENTATION OF AUTO PARALLEL CAR PARKING SYSTEM

Project Area of Specialization Electrical/Electronic EngineeringProject Summary

We are designing a car prototype that can identify a parking space by using ultrasonic sensors and parallel park by itself.

 when the car will identify a vacant space , the car checks to see whether that space is large enough to park in.

If it determines that there is sufficient space, the car will begin parallel parking into that space it uses information from sensors placed on front, corners and back .

This system is very helpful for drivers

Project Objectives

To develop an intelligent, user friendly automated car parking system which reduces the manpower and traffic congestion.

 To offer safe and secure parking slots within limited area.

Project Implementation Method

The project works through a set of instructions and

commands placed by the programmed engineer within the

Arduino through the software.

Arduino was feed through DC 12V source and have

several blocks as per use, including a 5-volt, We put the 7-

segment device and it has 10 blocks and it is divided into three

sections where 7 blocks of it are accompanied by resistance

according to its size.

For our project, we chose 470 ohm and 7 resistors of the

resistors connect with the 7 secmnet and the second end is

connected by wires to the arduino and each son represents Line

in the 7 Sequent. We will have three parties take two parties to

the vcc and the third party to the ground according to the feed

board and the engineer programmer through the program within

the Adrienne places all these orders and definitions.

As for the machine Almator Servea be simple and work

through the programming within the Ardennes and there are

three exits to be the outlet to the ground and the second to the

Vcc in the Ardennes and the third director to one of the girls in

the Ardennes and control through the above program and works

Edited with the trial version of

To remove this notice, visit

www.pdfpro.co

9

Almator angle 90. Any angle list the corner program is preset in

the preset program. The last piece is a sensitive car weight when

entering or leaving the car .

The project needs some components to work properly.

Here, all the components will introduced with details.

2.1 Arduino Board:

Arduino is a project made by the largest technical

community of engineers, developers and hobbyists whose goal

is to develop ideas and interactive control projects around the

world, based on different types of electronic panels but

programmed in a language Single programming and free.

Benefits of the Project

The smart parking system is considered beneficial for the

car park operators, car park patrons as well as in environment

conservation (Shaheen et al., 2005; Chinrungrueng et al., 2007).

For the car park operators, the information gathered via the

implementation of the Smart Parking System can be exploited to

predict future parking patterns.

Pricing strategies can also be manipulated according to

the information obtained to increase the company’s profit. In

terms of environment conservation, the level of pollution can be

reduced by decreasing vehicle emission (air pollutant) in the air

(Shaheen et al., 2005). This can be attributed to the fact that

vehicle travel is reduced. As fuel consumption is directly related

to vehicle miles travelled, it will be reduces as well.

Edited with the trial version of

To remove this notice, visit

www.pdfpro.co

6

Patrons are also able to benefit from smart parking system

as parking space are able to be fully utilized (Kurogo et al.,

1995; Sakai et al., 1995) with a safer (Shaheen et al.,

2005; Chinrungrueng et al., 2007), optimized and more efficient

system implemented (Sakai et al., 1995; Shaheen et al., 2005).

The system is made more efficient as vehicle travel time and

search time are significantly reduced due to the information

provided by the smart parking system.

With the information provided, drivers are able to avoid

car park that are fully occupied and locate vacant parking spaces

with ease elsewhere. The number of vehicles parked illegally by

the roadside which leads to traffic congestion is also reduced as

it is absorbed into the car parks (Kurogo et al., 1995). Most

importantly, traffic congestion can be reduced. All this would

eventually lead to convenience for the patrons.

Technical Details of Final Deliverable

Car will be parked automatically by itself .

sensors are sinked with arduino

motors are sinked with aruino

arduino perform the function of auto parking by the coding which will be done in arduino.

Final Deliverable of the Project Hardware SystemCore Industry EducationOther IndustriesCore Technology RoboticsOther TechnologiesSustainable Development GoalsRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	70000
physical model	Equipment	1	20000	20000
sensors	Equipment	2	16500	33000
battery	Equipment	2	2500	5000
motor	Equipment	2	2500	5000
Arduino	Equipment	1	1000	1000
LCD	Equipment	1	1000	1000
Wires	Miscellaneous	1	1000	1000
H-Bridge	Equipment	2	1000	2000
Steering position sensor	Equipment	1	2000	2000