Home automation with PIR abd Bluetooth control

The automation system connects with the smartphone through Bluetooth. The smart phone sends control Thsignals to switch home appliances ON or OFF by an android app through Bluetooth interface. The project is built on Arduino UNO and is used to control LEDs    and four home appl

Project Title

Home automation with PIR abd Bluetooth control

Project Area of Specialization

Internet of Things

Project Summary

The automation system connects with the smartphone through Bluetooth. The smart phone sends control Thsignals to switch home appliances ON or OFF by an android app through Bluetooth interface.

The project is built on Arduino UNO and is used to control LEDs    and four home appliances connected to the Arduino through relays.      

Project Objectives

The main objective of this project is to develop a home automation system using an Arduino board with Bluetooth being remotely controlled by any Android OS smart phone. As technology is advancing so houses are also getting smarter. Modern houses are gradually shifting from conventional switches to centralized control system, involving remote controlled switches. Presently, conventional wall switches located in different parts of the house makes it difficult for the user to go near them to operate. Even more it becomes more difficult for the elderly or physically handicapped people to do so. Remote controlled home automation system provides a most modern solution with smart phones. In order to achieve this, a Bluetooth module is interfaced to the Arduino board at the receiver end while on the transmitter end, a GUI application on the cell phone sends ON/OFF commands to the receiver where loads are connected. By touching the specified location on the GUI, the loads can be turned ON/OFF remotely through this technology. The loads are operated by Arduino board through optoisolators and thyristors using triac

Project Implementation Method

The system as the name indicates, ‘Home automation’ makes the system more flexible and provides attractive user interface compared to other home automation systems. In this system we integrate mobile devices into home automation systems. A novel architecture for a home automation system is proposed using the relatively new communication technologies. The system consists of mainly three components is a BLUETOOTH module, Arduino microcontroller and relay circuits. WIFI is used as the communication channel between android phone and the Arduino microcontroller. We hide the complexity of the notions involved in the home automation system by including them into a simple, but comprehensive set of related concepts. This simplification is needed to fit as much of the functionality on the limited space offered by a mobile device’s display. This paper proposes a low cost, secure, ubiquitously accessible, auto-configurable, remotely controlled solution. The approach discussed in the paper is novel and has achieved the target to control home appliances remotely using the WiFi technology to connects system parts, satisfying user needs and requirements. WiFi technology capable solution has proved to be controlled remotely, provide home security and is costeffective as compared to the previously existing systems. Hence we can conclude that the required goals and objectives of home automation system have been achieved. The system design and architecture were discussed, and prototype presents the basic level of home appliance control and remote monitoring has been implemented. Finally, the proposed system is better from the scalability and flexibility point of view than the commercially available home automation systems

Benefits of the Project

• Managing all of your home devices from one place. The convenience factor here is enormous. ...
• Flexibility for new devices and appliances. ...
• Maximizing home security. ...
• Remote control of home functions. ...
• Increased energy efficiency. ...
• Improved appliance functionality. ...
• Home management insights.

Technical Details of Final Deliverable

A wireless communications procedure used for home automation. It provides the application layer interoperability amongst home systems of different manufacturers that are a part of its association. It is a radio frequency technology that helps smart devices talk to each other

The Home automation system used an Android application and a Bluetooth technology in the design; this is because they are easy to use, fast, readily available, and reliable in communications between the remote user and devices.

Final Deliverable of the Project

HW/SW integrated system

Core Industry

IT

Other Industries

Security

Core Technology

Others

Other Technologies

Internet of Things (IoT)

Sustainable Development Goals

Decent Work and Economic Growth

Required Resources

If you need this project, please contact me on contact@adikhanofficial.com