HOME AUTOMATION SYSTEM
The main objective of this project is to develop a home automation system using an Arduino board with bluetooth being remotely controlled by any android OS smart phone. As technology is advancing so houses are also getting smarter. Modern houses are also getting smarter. Modern houses ar
2025-06-28 16:32:55 - Adil Khan
HOME AUTOMATION SYSTEM
Project Area of Specialization Software EngineeringProject SummaryThe main objective of this project is to develop a home automation system using an
Arduino board with bluetooth being remotely controlled by any android OS smart phone.
As technology is advancing so houses are also getting smarter. Modern houses are also
getting smarter. Modern houses are gradually shifting from conventional switches to
centralized control system, involving remote controlled switches. Presently, conventional
wall switches located in different parts of the house makes it difficult for user to go near
them to operate. Even more it becomes more difficult for user to go near them to operate.
Even more it become more difficult for the elderly all physically hand capped people to do
so. Remote controlled home automation system provide a most modern solution with smart
phone
In order to achieve this a bluetooth module is interface to the arduino board at the receiver
end while on the transmitter end , a GUI application on the cell phone send ON/OFF
command to the receiver where load are connected . by touching the specified location on
the GUI. The loads can be turned ON/OFF remotely through this technology.
The main objective of smart device Controlled Home Automation system is to make
human life easy and efficient with following features:
? The objective of this project is to provide automated experience.
? Reduce human effort.
? Automate circuits in household.
? Turn on and off every single appliance separately or turn on or on appliances with
one command.
? Control Appliances from android phone or tablet.
? Reduce the trouble of going through every single appliance.
Technologies used in this project are:
? Arduino Microcontroller.
? Relay Board
? Bluetooth Module HC-05
? Android Phone
? Power Supply
17
? Jumper Wires
? Soldering Iron
? LDR
? Arduino Ide
? Android Studio 3.0.1
will benfit in home in good manners.
Technical Details of Final DeliverableAndroid App
? Hardware
? Project Documentation
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 3210 | |||
| arduino | Equipment | 1 | 850 | 850 |
| relays | Equipment | 4 | 400 | 1600 |
| jumper wires | Miscellaneous | 20 | 0 | 0 |
| bulb | Miscellaneous | 2 | 380 | 760 |