Development of Infusion System for Controlled Drug Delivery
An infusion pump are medical devices that are used to deliver therapeutic fluids which can be either medication or nutrients into patient's body in controlled amount. They are widely used in clinical settings such as hospitals, nursing homes etc. While surveying the hospitals, we have observed that
Project Title
Development of Infusion System for Controlled Drug Delivery
Project Area of Specialization
Project Summary
An infusion pump are medical devices that are used to deliver therapeutic fluids which can be either medication or nutrients into patient's body in controlled amount. They are widely used in clinical settings such as hospitals, nursing homes etc. While surveying the hospitals, we have observed that three different brands of infusion pump (Nipro, B-Brawn and Mindray) have been taking over our medical setup. So far there is no any manufacturing in Pakistan to replace these brands. As a biomedical engineer we will design the infusion pump which would be indigenous, cost-effective and easily used in the hospitals and homes. This infusion system comprises of parameters that includes volume capacity, flow rate and infusion time. These parameters connecting together will help the doctors to provide a precise control drug delivery in the patient’s body. The device will be able to get input parameters from the end user and will deliver drug/medicine to the patient with the help of syringe forwarded through the motors mounted on the mechanical assembly that. These all parameters will be display on LCD attached to the infusion system. The following figure shows the block diagram paradigm of the device.
Project Objectives
The aim of this design and development of Infusion System for Controlled Drug Delivery. The objective of project includes the design and development of the following:
- Design of Device.
- Volume Capacity.
- Flow Rate.
- Infusion Time.
- Alarm.
- Battery Backup.
Project Implementation Method
- Simulation of the parameters
- Design of Mechanical Assembly.
- Design of Electronic Assembly.
- Selection of Electronic Components.
- Fabrication of Electro-Mechanical Assembly.
- Testing.
Benefits of the Project
The project benefit includes the following.
- This project is aimed towards eventually lowering the hospital loads during the COVID-19 pandemic by manufacturing batch production of infusion system devices.
- User friendly health device.
- Low cost device.
- Indigenous design.
- Benefit for Pakistan Health care Industry and society.
Technical Details of Final Deliverable
An infusion pump are medical devices that are used to deliver therapeutic fluids which can be either medication or nutrients into patient's body in controlled amount. They are widely used in clinical settings such as hospitals, nursing homes etc. While surveying the hospitals, we have observed that three different brands of infusion pump (Nipro, B-Brawn and Mindray) have been taking over our medical setup. So far there is no any manufacturing in Pakistan to replace these brands. As a biomedical engineer we will design the infusion pump which would be indigenous, cost-effective and easily used in the hospitals and homes. This infusion system comprises of parameters that includes volume capacity, flow rate and infusion time. These parameters connecting together will help the doctors to provide a precise control drug delivery in the patient’s body. The device will be able to get input parameters from the end user and will deliver drug/medicine to the patient with the help of syringe forwarded through the motors mounted on the mechanical assembly that. These all parameters will be display on LCD attached to the infusion system.
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Aurdino | Equipment | 2 | 2500 | 5000 |
| resistors | Equipment | 50 | 5 | 250 |
| capacitors | Equipment | 30 | 8 | 240 |
| diodes | Equipment | 20 | 5 | 100 |
| display | Equipment | 2 | 3500 | 7000 |
| motors | Equipment | 2 | 600 | 1200 |
| Mechanical Assembly | Equipment | 1 | 4000 | 4000 |
| PCB fabrication | Equipment | 1 | 9000 | 9000 |
| thesis printing and binding | Miscellaneous | 4 | 1500 | 6000 |
| multimeter | Equipment | 1 | 1200 | 1200 |
| breadboards | Equipment | 4 | 200 | 800 |
| transportation | Miscellaneous | 3 | 1000 | 3000 |
| jumper wires | Equipment | 50 | 3 | 150 |
| ICs | Equipment | 5 | 150 | 750 |
| finger pump | Equipment | 2 | 1000 | 2000 |
| pressure sensor | Equipment | 2 | 1500 | 3000 |
| Air flow sensor | Equipment | 2 | 800 | 1600 |
| Batteries | Equipment | 2 | 500 | 1000 |
| Alarm sensor | Equipment | 2 | 500 | 1000 |
| Total in (Rs) | 47290 |
If you need this project, please contact me on contact@adikhanofficial.com
Paying Guest
Our PG locator is a mobile app that seamlessly connects and interacts with everyone global...
Military War Robot
These are main objectives of Military War Robot (UGV): ?Enemy elimination : &n...
Low Velocity Impact on Foam Core Sandwich Panels
Sandwich structures are a special type of composites that include a middle layer of a low...
Design and Fabrication of Vertical Axis Wind Turbine Test Setup
Increasing world energy demand, and rising global warming, thrust researchers & engine...
Water Flow Monitoring System
Water is one of the most important substance in the world. Its consumption is increasing d...