Development of Digital Stethoscope for Detection and Classification of Heart and Lung Sounds.
Cardio Vascular and Pulmonary diseases are the leading causes of death in Pakistan. Our team is developing a digital stethoscope capable of detecting heart and lung sounds which are amplified and filtered in the chest piece and then these signals are used for detection and classification of heart an
Project Title
Development of Digital Stethoscope for Detection and Classification of Heart and Lung Sounds.
Project Area of Specialization
Project Summary
Cardio Vascular and Pulmonary diseases are the leading causes of death in Pakistan. Our team is developing a digital stethoscope capable of detecting heart and lung sounds which are amplified and filtered in the chest piece and then these signals are used for detection and classification of heart and lung diseases. The sound can be heard via headphone and waveform can be seen. Heart rate and breath count is also displayed. This is a cost-effective system and can be used for initial diagnosis in basic health care units.
Project Objectives
1.Digital Stethoscope
2.Heart Rate calculation by analysis of heart sounds
3.Breath Count calculation by analysis of lung sounds
Project Implementation Method
Benefits of the Project
1. Our project is 'low cost’ as compared to the two available competitors i.e. ThinkLabs One and Litmann 3M; and will also perform the 'classification' of the detected diseases on the basis of the respective recordings taken from patients, in addition to basic features.
2. Our DigiSteth helps Doctors who want to Detect Cardiac and Pulmonary Diseases by listening to the abnormalities in the respective lung and heart sounds and classify them
Technical Details of Final Deliverable
Sound will be converted into electrical signals, which will be filtered out via analogous circuits. It will be digitized and fed into MATLAB for further processing, which will be used for detection of diseases. It will be connected to an android application and cloud storage.
Final Deliverable of the Project
Type of Industry
Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| LM324 | Equipment | 10 | 25 | 250 |
| 0805 Resistor | Equipment | 100 | 5 | 500 |
| 0805 Capacitor | Equipment | 30 | 5 | 150 |
| NodeMCU | Equipment | 1 | 1000 | 1000 |
| Chest Piece | Equipment | 1 | 5000 | 5000 |
| Battery | Equipment | 5 | 40 | 200 |
| PCB Board | Equipment | 1 | 5000 | 5000 |
| 3D Print | Miscellaneous | 1 | 2500 | 2500 |
| Total in (Rs) | 14600 |
If you need this project, please contact me on contact@adikhanofficial.com
Visco Hydraulic (DSSV) Shock Absorber
In the Modern World where fast cars are becoming available to general public, the need of...
Voice Control Smart Wheel Chair
The Smart Control Wheelchair is a sum of all transportation solutions for handicapped...
Design And Fabrication Of Series Hybrid Solar Assist Recumbent E Trike
The interest to find an alternative mode of vehicles has seen a considerable growth in the...
IOT Based Analysis And Control of Electrical Parameters Of Power Distr...
Remote Monitoring, visualize and Control is one of the most important and necessary criter...
Design and Implementation of Smart Farming
The integration of modern information technologies into industrial agriculture has already...