Adil Khan 10 months ago
AdiKhanOfficial #FYP Ideas

Design of Intelligent Hybrid Heater

As the increasing International crude oil prices, energy issues have gained great importance for most countries. It is predicted that the global oil demand will grow at an annual rate of 1.9%. In accordance with the petroleum?s consumption rate, the world's proven crude oil reserves can only support

Project Title

Design of Intelligent Hybrid Heater

Project Area of Specialization

Electrical/Electronic Engineering

Project Summary

As the increasing International crude oil prices, energy issues have gained great importance for most countries. It is predicted that the global oil demand will grow at an annual rate of 1.9%. In accordance with the petroleum’s consumption rate, the world's proven crude oil reserves can only support the current oil consumption level for 45 years and that of natural gas is 66 years. Therefore, it is imperative to seek a substitute for oil in order to make it less dominant.

Solar energy is often seen as the fuel for the future as it is environmentally friendly and inexhaustible. Solar energy is used in two major ways such as the generation of electricity and heat. Solar energy is renewable, zero carbon energy source and can be used to displace non-renewable or carbon-emitting fuels (natural gas and crude oils).

One of the major applications of solar is electric heating. As, the non-renewable sources are limited and decaying with the passage of time so solar energy overcome the crises and can extend the lifespan of natural sources.

This hybrid heater works on basically two sources i.e. solar energy and natural gas. One of the major causes to design hybrid heater is that natural gas and other non-renewable sources are depleting day by day and energy crises are increasing which leads to high cost of natural gas. Therefore, there is a need of appropriate solution which would not only use the renewable source but would also reserve capacity of natural gas.

So, it will be cost effective and reduces the energy crises, further it will intelligently perform the operations like “automatic ignition, automatic shut off of gas supply to avoid any hazard incident if gas pressure gets low and automatic switching from gas to electricity in case of when gas wouldn’t come” hence we are moving towards solar energy to design hybrid heater.

Project Objectives

  • To make hybrid heater distinguishable from other heaters due to its features, less cost, less hardware and intelligently operations.
  • Include Intelligently operations and safety measures will increase its significance.
  • Automatic switching between the sources i.e. solar to natural gas and natural gas to solar.

Project Implementation Method

This project basically covers three different domains of engineering ;

  1. Control system
  2. Renewable energy source
  3.  Gas heater designing with electric solar heater.

Firstly, Control system is implemented and simulated using the software "Arduino" and "Proteus respectively". Design is further tested on harware for proper operation, Troubleshooting consumes a lot of time to work properly. It involves many problems e.g burn out of components like LCD, connection not properly connect etc.

After that, hybrid heater design is completed using "Autocad" and brought in hardware form. Finally, solar system is assembled with this whole setup to make this project complete.

Benefits of the Project

  • Energy consumption monitoring.
  • Leakage protection.
  • Smart on-off switching
  • Lower Energy Bills.
  • Efficient Heating.
  • Minimum usage of natural sources.

Technical Details of Final Deliverable

  1. Control system is working properly as done in simulations.
  2. Hybrid heater desgin is ready in hard form as designed in software "Autocad".
  3. Automating switching between sources.
  4. Power Supplies (AC to DC)
  5. PCB designing.

Final Deliverable of the Project

HW/SW integrated system

Core Industry

Energy

Other Industries

IT

Core Technology

Others

Other Technologies

Others

Sustainable Development Goals

Good Health and Well-Being for People, Affordable and Clean Energy

Required Resources

Item Name Type No. of Units Per Unit Cost (in Rs) Total (in Rs)
Connecting Wires Equipment603180
Resistors Equipment25250
Solinoid valve Equipment1900900
Gas pipe Equipment1100100
LCD (16 into 4) Equipment25001000
LCD (16 into 2) Equipment2380760
4 Channel Relay Module Equipment1400400
Arduino Mega Equipment111001100
Transformer Equipment1500500
voltage sensor Equipment1100100
buzzar Equipment15050
pressure sensor 1 Equipment117001700
pressure sensor 2 Miscellaneous 1400400
Temperature Sensor Equipment1450450
Gas Leakage Sensor Equipment34001200
PCB Equipment1230230
Ferric Chloride Equipment2100200
Gas Heater Miscellaneous Equipment110001000
Aluminium Material for Heater frame Equipment26001200
Screws,Wires,Markers,Screw driver,ceramic material,clips,connector Miscellaneous 115001500
Petrol Miscellaneous 112001200
Bread board Miscellaneous 3120360
Nichrome Wire Equipment34001200
Glass rods Equipment63602160
Total in (Rs) 17940
If you need this project, please contact me on contact@adikhanofficial.com
Controlling multiple motors through single Variable Frequency Drive

While controlling multiple motors through the single Variable Frequency Drive (VFD),...

1675638330.png
Adil Khan
10 months ago
Design and Development of an Autonomous Unmanned Ground Vehicle

An Autonomous UGV (Unmanned Ground Vehicle) is essentially a Robot that operates without t...

1675638330.png
Adil Khan
10 months ago
Autonomous Driver Sleep Detection

Technology is getting enhancements everyday new innovations, ideas and developments are be...

1675638330.png
Adil Khan
10 months ago
Voice and Gesture controlled standing wheelchair

Standing wheelchair is designed to enhance the life of disabled people by giving them a me...

1675638330.png
Adil Khan
10 months ago
How to Generate Electricity by Waste Materials

Waste-to-Energy is a challenging management in developing countries. There are many differ...

1675638330.png
Adil Khan
10 months ago