Design CNC machine for drawing and cutting using PLC and scada application
In this project we are design CNC machine for Drawing and cutting using PLC & Scada simulation. Numerically controlled machines (CNC) are very used in industrial processIing. The numerical control consists in a process of continuously feeding a PLC of special construction with
Project Title
Design CNC machine for drawing and cutting using PLC and scada application
Project Area of Specialization
Project Summary
In this project we are design CNC machine for Drawing and cutting using PLC & Scada simulation. Numerically controlled machines (CNC) are
very used in industrial processIing. The numerical control
consists in a process of continuously feeding a PLC of
special construction with a set of instructions so that the
movements of the machine tool can be controlled .
Project Objectives
- Drawing / cutting different shapes with the help of CNC machine which will help us to design projects for automation by creating some more critical and customized shapes.
- Controlling the positioning of stepper motor.
- using micro stepper drive control high voltage stepper motor
Project Implementation Method
In this project we Design 2-D CNC machine for drawing/cutting.
Graphic design we draw a figure or any shape in PC based sotware send vectors form then X-Y coordinates , Send to PLC (we make a program using ladder language on software of PLC S7-200 cpu 224 step 7 micro WIN ) PLC send pulses to Micro stepper drive and then Send Steps to Stepper Motor.X-Y coordinates give to PLC convert into pulses from PLC (PTO) for controlling stepper motor.
Benefits of the Project
the benefit of project we can make DIE of given shape
Drilling
Door decoration
PCB designing
ship yard special sheet cutting
etc.
Technical Details of Final Deliverable
- CUTTING PART components, 3 stepper, 1 motor cutting motor ,racks
- PLC S7stepper motor -200 CPU 224 1 PORT com
- extra stepper motor
- micro Stepper drive DM 860
- Small Stepper drive
- power supply 24 v , 5A, (12v)
- LEDS
- PUSH buttons
- Power button
- connecting wires
- PPI communication cable RS 485
Final Deliverable of the Project
Type of Industry
Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| CUTTING PART components, 3 stepper, 1 motor cutting motor ,racks | Equipment | 1 | 25500 | 25500 |
| PLC S7-200 CPU 224 1 PORT com | Equipment | 1 | 20000 | 20000 |
| stepper motor | Equipment | 2 | 2000 | 4000 |
| micro Stepper drive DM 860 | Equipment | 2 | 4000 | 8000 |
| Small Stepper drive | Equipment | 1 | 2000 | 2000 |
| power supply 24 v , 5A | Equipment | 2 | 1500 | 3000 |
| power supply 12 v , 3A | Equipment | 1 | 950 | 950 |
| LEDS | Equipment | 10 | 50 | 500 |
| PUSH buttons | Equipment | 10 | 70 | 700 |
| PPI sheet | Miscellaneous | 1 | 1200 | 1200 |
| DB | Miscellaneous | 1 | 2200 | 2200 |
| Power button | Equipment | 3 | 150 | 450 |
| connecting wires | Equipment | 5 | 130 | 650 |
| PPI communication cable | Equipment | 1 | 3200 | 3200 |
| Total in (Rs) | 72350 |
If you need this project, please contact me on contact@adikhanofficial.com
Low Cost Multiple 2D Barcode reading system for GS1 Serialization, tra...
To read multiple 2D barcodes on medicine boxes, an expensive high-resolution and large fie...
Smart Distribution Lines
The electricty is now one of the most important part of the world. The transmission lines...
SKYHAWK DELTAWING VTOL DRONE
Skyhawk fixed wing Vertical Take Off and Landing Drone aims to travel with a speed of 30km...
Water Purity Detection App Using Machine Learning
Our daily necessities i...
Real time Manipulation of Multiple Robotic Arms with hand Gestures usi...
Main Reasons: The main reason of this project is to make a gesture controlled multiple rob...