Design and Fabrication of Solar Electric Bike
In this project, designing, fabrication, and testing of the electric bike will be carried out. This bike will utilize three sources of energy, electrical energy, solar energy, and a regenerative braking system.
Project Title
Design and Fabrication of Solar Electric Bike
Project Area of Specialization
Project Summary
In this project, designing, fabrication, and testing of the electric bike will be carried out. This bike will utilize three sources of energy, electrical energy, solar energy, and a regenerative braking system.
Project Objectives
- The main objective of the project is to use solar energy and electrical energy as a source to run a two-wheeled motorbike.
- To minimize air pollution for a healthy lifestyle by reducing the emission of hazardous gases and noise pollution.
- To reduce energy losses as much as possible.
Project Implementation Method
- Literature review
- Designing an efficient model of solar electric bike
- Procurement of required materials and components
- Fabrication of prototype of electric bike
- Testing of solar electric bike with available energy resources
- Thesis/report
Benefits of the Project
- Eco- friendly
- Comfortable and easy to drive
- No cost required for fuel
- Noise-free drive
- Maximum possible recovery of energy losses
Technical Details of Final Deliverable
The final deliverable will be a prototype electric bike that will be powered by a battery with the charging sources: solar panels, regenerative braking and electrical energy.
Final Deliverable of the Project
Core Industry
Other Industries
Core Technology
Other Technologies
Sustainable Development Goals
Required Resources
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| 12 volt DC moter | Equipment | 1 | 5000 | 5000 |
| solar cell | Equipment | 1 | 9000 | 9000 |
| charging controller | Equipment | 1 | 4000 | 4000 |
| Frame and engine | Equipment | 1 | 15000 | 15000 |
| Electricity Generator | Equipment | 1 | 3000 | 3000 |
| RPM controller for Dc motor | Equipment | 1 | 5000 | 5000 |
| Battery | Equipment | 1 | 5000 | 5000 |
| Total in (Rs) | 46000 |
If you need this project, please contact me on contact@adikhanofficial.com
Restate and Guide
We are going to create a mobile application where people can achieve the solution of the p...
vortex bladeless wind turbine
It uses a radically new approach to capturing wind energy. The device captures the energy...
Cancer Care
A report published in 2018 by Shaukat Khanum Cancer Hospital, 150,000 patients are diagnos...
Scheming a model for Smart Distribution System
Electricity, or electric power has become the most popular commodity of the modern world.&...
Heart attack detection system
Body health monitoring is especially important to us to make sure our health is in excelle...