Design & fabrication of windsock with digital display
Windsocks are used to tell wind speed and the direction of the wind speed itself. Windsocks typically are used at airports to indicate the direction and strength of the wind to pilots. Students will fabricate wind sock which will be used in aerodromes. Students will also embed electronic system whic
2025-06-28 16:31:08 - Adil Khan
Design & fabrication of windsock with digital display
Project Area of Specialization Electrical/Electronic EngineeringProject SummaryWindsocks are used to tell wind speed and the direction of the wind speed itself. Windsocks typically are used at airports to indicate the direction and strength of the wind to pilots. Students will fabricate wind sock which will be used in aerodromes. Students will also embed electronic system which will convert mechanical output changes in digital display including the display of humidity, wind speed, wind direction.
Project Objectives
|
- Fabrication of large scale windsock
- Development and implementation of digital display
- Accuracy & precise measurement of wind speed
Implementation off this project is at those areas where you have to know about wind speed like most important is airports, other than this industrial areas
we did a survey at walton airpot and they asked if you will complete your project properlly we will give you a chance to implement you project at airport for facilitate them.
Benefits of the ProjectThe need of this project is most important at airports where you have to know the wind speed during takeoff and landings so the digital display of windspeed is easily show to the ATC and the pilots as well
Technical Details of Final Deliverablewe are making a large scale windsock which is primery system to know about wind speed.
we are makeing a system which tells us the wind speed at the digits on display.
we are using a anemometer which gives us the rpm and we will convert this rpm to the wind speed through the arduino programming
Final Deliverable of the Project Hardware SystemCore Industry TransportationOther Industries Others Core Technology OthersOther Technologies Wearables and ImplantablesSustainable Development Goals Affordable and Clean EnergyRequired Resources| Elapsed time in (days or weeks or month or quarter) since start of the project | Milestone | Deliverable |
|---|---|---|
| Month 1 | Done | Title Selection & Survey |
| Month 2 | Done | Literature Review |
| Month 3 | Done | Proposal Report & Defense |
| Month 4 | Done | Fabrication of Windsock till FYP 1 |
| Month 5 | Done | Coding & Calibration of Wind speed Sensor |
| Month 6 | partially Achieved | Testing & Troubleshooting/working on digital display |
| Month 7 | pending | Thesis writing |
| Month 8 | pending | Final Presentation of FYP 2 |