Automation In Electric Biling System Through Smart Metering Using Global System For Mobile Platform
Everything getting smarter and increase facilities for the humankind to make their work accurate, faster and more precise. Continue with the legacy observe a loop hole in the field of metering so came up the idea of ?Automation in Smart Metering? in this project we jot down all the issues faced by c
2025-06-28 16:25:28 - Adil Khan
Automation In Electric Biling System Through Smart Metering Using Global System For Mobile Platform
Project Area of Specialization Electrical/Electronic EngineeringProject SummaryEverything getting smarter and increase facilities for the humankind to make their work accurate, faster and more precise. Continue with the legacy observe a loop hole in the field of metering so came up the idea of “Automation in Smart Metering” in this project we jot down all the issues faced by citizens and resolves all the headaches of the citizens like over-billing, improper reading , estimated bills, and load distribution issues.
To keep an eye on our bill along with the expenditure of discrete load will become necessity due to the inflation rate in Pakistan so, our solution gives all the perks and power to each person, provides marked down solution to all above issues that need abruptly
Message technology surveil distinct load, alert generation, alignment of load through message, Power factor estimation are the key feature of our peculiar solution and this distinct our project from the others.
Project Objectives- To check power consumption rate (billing) automatically with the help of cell phone at domestic, commercial and industrial level.
- Power factor measurement of each load solely using message technology either at domestic, commercial and industrial level.
- Leverage the Users’ to check any load estimated bills and overall bill.
- Supervision to all the loads, health check and any aberrant power consumption can also monitor.
- Smooth over all the hassle either in your load, meter or the bill.
In this project overall Controller communicate with main modules like energy meter, LCD, GSM module and Relays so the main core of this project User’s send message to the Module .Module receive that msg packet and forward it to the Arduino the main processing unit if the user’s said turn on/off the Loads so the Arduino get the msg and operate the relays respectively. If the user asks about the power factor, current, voltage or bill then controller get the reading from the meter through Serial communication and parse and calculate the required results send it to the display this is the basic overview of our whole project.
Benefits of the ProjectElectronic devices become smart day by day and give the power of control to the users and mobile phone assist the most in this present time. Every sole want sovereignty in their entire life and engineers become successful to provide the supremacy to individual through smarter devices so accord on this cause arise a solution of smart metering.
Health check, Home control magic provides the power to sole to run their appliances by their own way but all this still the individual will not satisfy with their bills the main causes includes manual energy readings, high and overcharged bills , faulty loads causes the out of pocket before the end of the month.
Our Solution is a health check for the Energy bills and for the damaged device that helps sole to prevent from out of pocket before the end of the month and can easily figure out what is the main root of such an overestimation.
The value proportion of this is its wireless and remote connectivity and controllability anywhere from the world just you need a secure and reliable service provide.
Technical Details of Final DeliverableWithin the existing framework, power meter reading for power utilization and charging is done by human workers from domestic to domestic and building to buildings. This requires a gigantic number of workers and long working time to attain total area data collection and charging. Human workers billing is inclined to perusing mistake as at some point the houses electric meter is put where it isn't easily open. Labor charging work is sometimes also limited and moderated down by bad environmental condition. Paper charging has the tendency of losing within the post box. The increased development of private lodging and industrial buildings within the developing country such as for illustration, Pakistan require more human specialists and longer working hours to total the utilization of perusing errand. These increments the vitality supplier operation costs for meter perusing.
Final Deliverable of the Project Hardware SystemCore Industry Energy Other Industries Others Core Technology Internet of Things (IoT)Other Technologies Artificial Intelligence(AI)Sustainable Development Goals Responsible Consumption and ProductionRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 79000 | |||
| •Relays •Voltage regulator IC • Light emitting diodes | Equipment | 3 | 3000 | 9000 |
| •Liquid crystal display •Resistors •Transistors •Push button | Equipment | 3 | 3400 | 10200 |
| •Energy meter •Arduino Pro mini •Relay driver IC | Equipment | 3 | 4500 | 13500 |
| •IC socket •Capacitor •Max485 Module | Equipment | 3 | 3700 | 11100 |
| •Cables and Connectors •Arduino Headers. • Printed circuit board | Equipment | 3 | 3900 | 11700 |
| •Step-down transformers. • GSM module. | Equipment | 3 | 4500 | 13500 |
| screws, nuts, tray, spray, aluminium | Miscellaneous | 4 | 2000 | 8000 |
| bulb, holders, wires | Miscellaneous | 3 | 400 | 1200 |
| glass tray | Miscellaneous | 1 | 800 | 800 |