Automatic gate for initial detection of covid-19

Project Title

Automatic gate for initial detection of covid-19

Project Area of Specialization Biomedical EngineeringProject Summary

The COVID-19 pandemic has left no country untouched.According to WHO one of the biggest symptom of COVID-19 is fever or high temprature, So here we will try to moniter the temprature of individuals without touching him and we can save the record of that temprature.Also we will use camera for face recognition of individual passing through this gate and we will use alarm system for alert as the sensors record high temprature of camera detect strange face. The gate is equipped with automatic disinfecting spray which can be controlled by motion sensor as the motion sensor sense motion the spray will start automatically and stop after 2 seconds. The gate is also equipped with barrier hand and it will remain closed and allow no one to pass with disinfecting and temprature monitering

Project Objectives

=>Protection of our gate keepers and health care personals

=>Fever detection

=>Face detection and face recognation

=>Auto disinfecting and sanatizer spray

=>Time saving and money saving

Project Implementation Method

We will use 3 controllers and 1 motion sensor 2 temprature sensors and 1 ESP32 cam water pump and motor for barrier hand and gate designing.

We will implement our project on hardware the motion sensor is connected to arduino UNO and output of arduino is given to relay module for activating the disinfecting spray.

Temprature sensor is attached to 2nd arduino UNO and its output pin is attached to 2nd relay and alarm.

Esp32 cam is attached to 3rd arduino UNO and its output is attaced to 2nd alarm and  ESP32 is also connected through wifi with our laptop/PC through which we will moniter the face of individuals

Benefits of the Project

The aim of this project is to stop spreading of COVID-19 in our society. Now a days our gate keepers and health care personals are doing job at entrance gates to check the temprature of every individual entering and they have high chances of getting infected so we are targeting the safety of our gatekeepers and health care personals.. also we are doing face recognition which is for security purpose to insure the safety.

=>Face recognition.

=>Tempreture monitering and fever detection

=>Alarm and record keeping if record high temprature

=>Sanetizer saving

Technical Details of Final Deliverable

This gate will help to control spreading of COVID-19 and will do auto disinfecting and auto face recognition of individuals. It will help in time saving and money saving also it will help in security advancment for high security institution and departments 

Final Deliverable of the Project Hardware SystemCore Industry MedicalOther Industries Education , Security Core Technology Wearables and ImplantablesOther TechnologiesSustainable Development Goals Good Health and Well-Being for PeopleRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	60300
Arduino UNO	Equipment	3	1200	3600
PIR SENSOR	Equipment	1	1000	1000
Water pump	Equipment	1	4000	4000
Toyota vapour motor	Equipment	2	2500	5000
IR temprature sensor	Equipment	3	4200	12600
Connectibg wite	Equipment	80	20	1600
PVC pipe	Equipment	5	100	500
Boards	Equipment	3	400	1200
12V POWER SUPPLY	Equipment	2	1500	3000
5v power supply	Equipment	2	500	1000
Spraying tools	Equipment	2	1200	2400
Gate design and material	Equipment	1	8000	8000
Alarm system	Equipment	2	800	1600
Esp 32 cam	Equipment	1	4000	4000
FTDI programmer	Equipment	1	500	500
Wifi module	Equipment	1	600	600
Transportatuon	Miscellaneous	5	600	3000
Thesis printing	Miscellaneous	3	1500	4500
Solder and alloy	Equipment	2	300	600
Relays	Equipment	4	400	1600