Automatic Cooking Machine

Project Title

Automatic Cooking Machine

Project Area of Specialization RoboticsProject Summary

An Automatic Cooking Machine includes a multi-ingredient dispensing system comprising of multi-ingredient mini receptacles, liquid dispenser and a solid ingredient  dispensing selector motor underneath the receptacles with a operatable limit switch stopper. A limit switch Stopping a receptacle at dispensing position engaging dispensing selector motor to dispense the ingredient from that receptacle at current position. A Cooking section have a heating stove and a mixing unit at base. A Control Unit that is configured and electronically connected to motors drives of all sections, is configured to process a multistage cooking process and controls the dispensing selector motor, heat stove motor, mixing unit and liquid dispenser pumps.

Project Objectives

To Design an Automatic Cooking Machine:

         This involves the designing of the project using CAD and electrical design softwares.

To Fabricate an Automatic Cooking Machine:

          This involves the complete fabrication of the project according to the design.

To perform tests on the Machine:

          This involves the tests that will be performed on machine like cooking different dishes.

Project Implementation Method

Requirements:

Due to busy routine these days many people are  worried about cooking meal. They have to compromise on home cooked food and prefer to consume food from markets which have different levels of spices that can cause diseases. In order to get delicious home cooked food in less time with less effort automatic cooking machine is the best solution.

Design:

Design of the project involves the CAD and electronics designing of the project. For CAD designing Creo Parametric 3.0 will be used and for eletronics designing Proteus 8.0 will be used. Mechanisms like gas valve closing and opening,stirring,ingridients pouring will be designed with the help of softwares.

Fabrication:

After the succesful design of the project,the next step will be it's fabrication. The project is to be fabricated by using different materials like wood and steel. Different servo motors,DC gear motors and sensors will be used in the project.

Testing:

Different dishes will be cooked on this project and their results will be checked.

Benefits of the Project

=> Cook food in less time

=> Time efficient

=> Cook food in a healthy way

=> Resource efficient

Technical Details of Final Deliverable

The Final Delivered project will be able to cook various dishes like noodles,biryani and a vegetable dish.It will have fully automatic control like pouring ingredients into cooking pot,gas valve control,stirring control will be automatic.Initially User just have to load ingredients into their specific containers as mentioned in the dish ,manually and then have to press a key to start the automatic process.

Final Deliverable of the Project Hardware SystemType of Industry Food Technologies OthersSustainable Development Goals Good Health and Well-Being for PeopleRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	21460
Steel angles(1ft)	Equipment	4	50	200
Nuts and bolts	Equipment	60	5	300
Drill bits	Equipment	10	40	400
Glue	Equipment	5	50	250
Wood	Equipment	1	5000	5000
Bearings	Equipment	1	200	200
Carpenting	Equipment	1	5000	5000
Cooking Pot	Equipment	1	250	250
Gas Burner	Equipment	1	500	500
Welding	Equipment	1	500	500
Aluminium Foil	Equipment	1	250	250
Bottles	Equipment	2	200	400
Pumps	Equipment	2	300	600
Motors(DC Gear)	Equipment	2	500	1000
Motors(Servo)	Equipment	2	600	1200
Varoboard	Equipment	3	150	450
ARM Cortex	Equipment	1	700	700
Limit Switch	Equipment	1	100	100
Gas Valve	Equipment	1	200	200
IC s	Equipment	3	20	60
Headers	Equipment	5	10	50
Wires	Equipment	50	5	250
Ignitor	Equipment	1	300	300
Steel Sheet	Equipment	1	300	300
Transport	Miscellaneous	1	2000	2000
Testing(dishes materials)	Miscellaneous	1	1000	1000