Auto Power Supply Control System from four different sources to ensure no break power

Project Title

Auto Power Supply Control System from four different sources to ensure no break power

Project Area of Specialization Electrical/Electronic EngineeringProject Summary

The main objective of this project is to provide in the power system transformers may be loaded beyond their nameplate ratings due to a fault or some emergency conditions. This type of overloading can cause either short term failures or long term failures. Increase in hot spot temperature would also lead to the accelerated ageing of the transformers resulting in transformer overload. So in order to keep the body temperature of the transformer within its nameplate rating, the transformer must be loaded efficiently in a controlled manner

Project Objectives

We decided to make an electrical system which solve these issue to ensure continuous supply under over load condition by load sharing.

Thus by the sharing load on transformer the transformer is protected .This will be done by connecting another transformer in parallelThe benefit of the project is to solve this issue to ensure continuous supply under over load condition by load sharing

Project Implementation Method

The benefit of the project is to solve this issue to ensure continuous supply under over load condition by load sharing

Benefits of the Project

The benefit of the project is to solve this issue to ensure continuous supply under over load condition by load sharing

Technical Details of Final Deliverable

decided to make an electrical system which solve these issue to ensure continuous supply under over load condition by load sharing.

Thus by the sharing load on transformer the transformer is protected .This will be done by connecting another transformer in parallelThe benefit of the project is to solve this issue to ensure continuous supply under over load condition by load sharing

Final Deliverable of the Project Hardware SystemCore Industry EducationOther IndustriesCore Technology Wearables and ImplantablesOther Technologies Others, Big DataSustainable Development Goals Gender EqualityRequired Resources

Item Name	Type	No. of Units	Per Unit Cost (in Rs)	Total (in Rs)
			Total in (Rs)	43780
transformer 10A	Equipment	2	7000	14000
aurdino uno	Equipment	1	1500	1500
5v relay	Equipment	1	800	800
LCD Display16*2	Equipment	1	230	230
Hall effect sensor	Equipment	1	1200	1200
Potentiometer	Equipment	1	50	50
Circuit breaker	Equipment	2	5000	10000
resistor	Equipment	4	4000	16000