The main idea of our Project to made a Artificial neural networks such as multilayer perceptron (MLP) and radial basis function (RBF) neural networksArtificial neural networks such as multilayer perceptron (MLP) and radial basis function (RBF) neural networks. which control all the irrigation p
ARTIFICIAL INTELLIGENT AND IOT BASED SMART IRRIGATION SYSTEM
The main idea of our Project to made a Artificial neural networks such as multilayer perceptron (MLP) and radial basis function (RBF) neural networksArtificial neural networks such as multilayer perceptron (MLP) and radial basis function (RBF) neural networks. which control all the irrigation problam in fiald.automatic water pump control using machine learning algorithms and built-in system technologies. Measurement of environmental factors such as temperature and soil moisture using a set of sensors.also give information about water level in tank and identify the level of rain by sensors.
will support artificial neural networks based on the controller Node MCU to control the speed of the irrigation level with water in an effective way.also share information to the owner by blank app
The Following are the main objectives of this project:
This Project hardware we use Node MCU board which have ESP 8266 WIFI madual,which we connect different kind of sensors which give data to Node MCU; In Node MCU have a parograming algorithm which control all the problam artificially and also Node MCU connect to internet of things which give information by blank app to owner.blank is a open source softwere.
This Al Smart irrigation system used in different greenhouses; where a man can control all the need of greenhouse. At any time, there is a variation in current status of rain, humidity and temperature of the around so this project controls artificially all the variation.
This project will be built on hard board and wood strip.Which all the sensor are connecting through jumper wires so tightly that information can not miss.also make artficial greenhouse in hard board.
| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Node MCU | Equipment | 1 | 1000 | 1000 |
| DHT11 sensor | Equipment | 2 | 500 | 1000 |
| Rain drops detection sensor | Equipment | 4 | 200 | 800 |
| soil moisture sensor | Equipment | 4 | 250 | 1000 |
| Relay module | Equipment | 5 | 170 | 850 |
| jumper wire | Equipment | 4 | 120 | 480 |
| water pump | Equipment | 2 | 220 | 440 |
| Arduino UNO | Equipment | 1 | 2000 | 2000 |
| water level sensor | Equipment | 2 | 170 | 340 |
| raspberry pi | Equipment | 1 | 33000 | 33000 |
| expenditure other then equipment | Miscellaneous | 1 | 10000 | 10000 |
| Ultrasonic sensor | Equipment | 2 | 300 | 600 |
| Total in (Rs) | 51510 |
Using the audio of a person our system would classify gender, age and ethnicity of the voi...
The aim of this project is synchronization of multiple motors using wireless technology. T...
ECG monitoring system using IOT is an IOT based project for monitoring the health of the p...
Renting is an activity done for acquiring or taking possession of things(Apartement, tools...
This web-based tool is a research based project. The project is based on the Framewor...