Antenna Design for Five G Application
5G communication system is considered as a revolution in the wireless communication market where a very high bandwidth is required for modern smart phones. This fast revolution drives researchers for developing the communication technology whether in software or hardware fields. Also, antenna design
2025-06-28 16:25:07 - Adil Khan
Antenna Design for Five G Application
Project Area of Specialization Electrical/Electronic EngineeringProject Summary5G communication system is considered as a revolution in the wireless communication market where a very high bandwidth is required for modern smart phones. This fast revolution drives researchers for developing the communication technology whether in software or hardware fields. Also, antenna design is considered as a basic field which needs a continuous developing for serving 5G wireless communication systems.
Project ObjectivesThe main goal of this thesis is designing multiple-input multiple-output MIMO microstrip antenna for serving the 5G communication systems by achieving all the important features of the recent wireless communication systems.
Project Implementation MethodThe antenna simulation will be completed in HFSS and CST Microwave Studio. A prototype will be fabricated and tested.
Benefits of the ProjectMIMO (Multiple-Input Multiple Output) is a technology that will be used in 5G mobile networks aiming to increase the capacity of the system without using an extra bandwidth where the capacity is directly proportion with the number of antennas at the transmitter or at the receiver. It achieves higher data rate with low cost, but it may increase the complexity of the system structure.
Technical Details of Final DeliverableThe aim of this project is to design a microstrip patch antenna for sub 6 GHz 5G. The frequency band is 3.6 GHz.
The deliverables are:
Design of sub 6 GHz antenna for 5G cellular device. Thie simulation will be performed in CST Microwave Studio.
A harware prototype of the proposed antenna will be fabricated and will be tested.
Final Deliverable of the Project HW/SW integrated systemCore Industry TelecommunicationOther IndustriesCore Technology OthersOther TechnologiesSustainable Development Goals Industry, Innovation and InfrastructureRequired Resources| Item Name | Type | No. of Units | Per Unit Cost (in Rs) | Total (in Rs) |
|---|---|---|---|---|
| Total in (Rs) | 60500 | |||
| PCB Rogers 5880 | Equipment | 2 | 15000 | 30000 |
| Fabrication service | Miscellaneous | 1 | 10000 | 10000 |
| RF SMA Connectors | Equipment | 10 | 1000 | 10000 |
| RF Cable Rigid | Equipment | 3 | 3000 | 9000 |
| RF Cable semi rigid | Equipment | 3 | 500 | 1500 |